biohazard72
Rising Star
Well, I suppose I'll post a bit about myself, and what brought me to do DMT, if only to organize my thoughts on the subject.
I didn't become interested in entheogens at first. My first experience, with 5g cubensis mushrooms, was quite nice coming up but then it became too overwhelming and I went to a negative space. Luckily I have strong resolve and knew I'd come down, so I didn't have a bad trip, just an overly intense one for a newcomer. Trying hallucinogens again didn't cross my mind again, but because of their safety I was open to their use.
Several months later, I tried LSD on a whim while drunk. I found it quite enjoyable; visually interesting yet not completely overwhelming. I also had some epiphanies over aspects of myself as a person that I am quite thankful for. So my interest in entheogens increased both as a fun, safe drug as a way to better understand myself.
Since then I've tried LSD once more, but the batch was not nearly as potent as the previous time. However, I still got some good insight into myself and consider that experience worthwhile. However, I also wanted to try something new.
Around this time I extensively researched a myriad of drugs. Even drugs I had no interest at all in using (heroin, cocaine, meth, etc.) I found interesting as a subject to research. Through this, I decided I wanted to try many entheogens.
First on my list has become DMT, which has many different variations, all of which seemed interesting to me. The fact that it could be extracted from organic sources without going through a dealer was also very attractive.
I ordered 500g of bark with the hope of trying smoked DMT (for fun), ayahuasca (for healing), anahuasca, pharmahuasca, and enhanced DMT leaf. I figured these experiences would be an interesting view into my consciousness. While the bark came, I assembled the extraction ingredients.
Last friday I began an extraction tek on 160g bark (adapted from Vovin's tek). My first issue was heating in a water bath. While heating my two jars during the acid extraction, one broke in the water bath! I learned then to put the jar lid down, and to let the water bath cool a bit so the bottom of the pot isn't so hot.
Filtration was also an issue. I ended up using double coffee filters to decent success, but in the future I intend to construct a homemade vacuum pump. Monitoring pH with papers was also suboptimal.
Separation using 1L Mason Jars and a 25mL pipet wasn't easy. I ended up learning to suck up as much naphtha as possible from the separation, then sucking out the bottom. When most of the bottom was sucked out, I sucked the mixture and put it into a test tube, from which I collected as much as the separated naphtha.
So, I ended up boiling down the water bath that the jar broke in and combining this material with that obtained from the other jar. I boiled this down slowly, defatted, basified, and extracted hoping for the best.
I got 1.3g! The spice is slightly off-white and smells flowery. I am very happy. I measured out the 27 doses and stored them for future smoking. I'm building a machine later.
On Saturday I intend to brew an anahuasca brew, with 40g syrian rue and 150g bark (and using gelatin to remove tannins). I'm intending on having 12 doses (about 3g rue and 12g bark per drink) and having a ceremony. But I'm going to try a smaller amount (half dose) to assess the strength before I give any to others.
After this, I will be extracting 100g of syrian rue (hopefully using a new vacuum filter). In addition, I'll be extracting the remaining 200g of bark, hopefully getting 1.5-2g (I'll also have a sep. funnel and pH meter to make things smoother). With these extracts, I intend to partake in pharmahuasca (probably alone).
Leftover DMT will be used for an enhanced leaf mix with dream herb or blue lotus. This will exhaust all of my supplies.
Those are my plans. Following all of those, I hope to try true ayahuasca and get enough pure DMT and harmaline alkaloids for many pharamahuasca experiences or enhanced leaf.
So that's my little blurb about me, what brought me to DMT, and what I hope to do with it. First time smoking goes tomorrow night, wish me luck.
I didn't become interested in entheogens at first. My first experience, with 5g cubensis mushrooms, was quite nice coming up but then it became too overwhelming and I went to a negative space. Luckily I have strong resolve and knew I'd come down, so I didn't have a bad trip, just an overly intense one for a newcomer. Trying hallucinogens again didn't cross my mind again, but because of their safety I was open to their use.
Several months later, I tried LSD on a whim while drunk. I found it quite enjoyable; visually interesting yet not completely overwhelming. I also had some epiphanies over aspects of myself as a person that I am quite thankful for. So my interest in entheogens increased both as a fun, safe drug as a way to better understand myself.
Since then I've tried LSD once more, but the batch was not nearly as potent as the previous time. However, I still got some good insight into myself and consider that experience worthwhile. However, I also wanted to try something new.
Around this time I extensively researched a myriad of drugs. Even drugs I had no interest at all in using (heroin, cocaine, meth, etc.) I found interesting as a subject to research. Through this, I decided I wanted to try many entheogens.
First on my list has become DMT, which has many different variations, all of which seemed interesting to me. The fact that it could be extracted from organic sources without going through a dealer was also very attractive.
I ordered 500g of bark with the hope of trying smoked DMT (for fun), ayahuasca (for healing), anahuasca, pharmahuasca, and enhanced DMT leaf. I figured these experiences would be an interesting view into my consciousness. While the bark came, I assembled the extraction ingredients.
Last friday I began an extraction tek on 160g bark (adapted from Vovin's tek). My first issue was heating in a water bath. While heating my two jars during the acid extraction, one broke in the water bath! I learned then to put the jar lid down, and to let the water bath cool a bit so the bottom of the pot isn't so hot.
Filtration was also an issue. I ended up using double coffee filters to decent success, but in the future I intend to construct a homemade vacuum pump. Monitoring pH with papers was also suboptimal.
Separation using 1L Mason Jars and a 25mL pipet wasn't easy. I ended up learning to suck up as much naphtha as possible from the separation, then sucking out the bottom. When most of the bottom was sucked out, I sucked the mixture and put it into a test tube, from which I collected as much as the separated naphtha.
So, I ended up boiling down the water bath that the jar broke in and combining this material with that obtained from the other jar. I boiled this down slowly, defatted, basified, and extracted hoping for the best.
I got 1.3g! The spice is slightly off-white and smells flowery. I am very happy. I measured out the 27 doses and stored them for future smoking. I'm building a machine later.
On Saturday I intend to brew an anahuasca brew, with 40g syrian rue and 150g bark (and using gelatin to remove tannins). I'm intending on having 12 doses (about 3g rue and 12g bark per drink) and having a ceremony. But I'm going to try a smaller amount (half dose) to assess the strength before I give any to others.
After this, I will be extracting 100g of syrian rue (hopefully using a new vacuum filter). In addition, I'll be extracting the remaining 200g of bark, hopefully getting 1.5-2g (I'll also have a sep. funnel and pH meter to make things smoother). With these extracts, I intend to partake in pharmahuasca (probably alone).
Leftover DMT will be used for an enhanced leaf mix with dream herb or blue lotus. This will exhaust all of my supplies.
Those are my plans. Following all of those, I hope to try true ayahuasca and get enough pure DMT and harmaline alkaloids for many pharamahuasca experiences or enhanced leaf.
So that's my little blurb about me, what brought me to DMT, and what I hope to do with it. First time smoking goes tomorrow night, wish me luck.