Tryptamineenthusiast
Esteemed member
Hello wonderful conscious internet beings,
I have been gifted so much wonderful knowledge from the nexus so I figure it is high time I gave something back.
The following is the easiest to make makeshift DMT pipe. While this pipe likely does not rival the e mesh or gvg in terms of ease of use, it is much cheaper, easy to make, and will save you tons of spice due to its efficient and complete vaporization. This pipe is capable of sending users straight past hyperspace and into the void in one hit of nnDMT
The theory
One does not need much DMT to breakthrough, so why is it that the conventional wisdom is that you need three hits? Well, it is because we are consuming a large amount of air with our DMT vapor and even then we are not fully filling our lungs. The GVG and the machine are great but they both have large openings on both ends which let a large volume of air pass through leading to the requirement for multiple lungfuls and expensive torches. Additionally the GVG is quite pricey and the machine requires drilling into glass--somthing many do not have the equipment for. People have reported one hit breakthroughs on the emesh vaporizer but the price tag for it is quite large. What if there were a cheap and effective way to continuously vaporize DMT at the perfect rate while limiting airflow only to what is needed to carry the DMT into the lungs so that the spice can be vaporized in one long concentrated hit?
Now introducing: The Micromachine!
Materials:
1. One 150 mm borosilicate glass Pasteur pipette ($0.50-$20)
I get singles from a chem hobby shop near me for 50 cents each, but you can find bulk boxes online for about $15 per 100 count and then you will never have to worry about breaking your pipe. See the reference image above for what they look like
2. Core boy or similar thick copper scouring pad ($2.50-$5.00)
Must be thick enough not to burn, nobody wants to inhale metal oxides
3. Disposable BIC or similar lighter ($1-$4)
The one-hit void breakthrough mentioned above used a kitchen match so a disposable lighter is more than enough
4. That's literally it!
Assembly:
Cut off a small portion of the copper scouring pad (enough to make a plug 20mm long and 5mm wide--see above) make the plug by squeezing the material with your fingers, it should be slightly conical so that one end is a bit fatter. Then, using a lighter, fully burn off any coating or machine oil, this should not be an issue if you are using the right scouring pad but it is always better to be safe. Place said plug in the wide end of of the pipette with the wide end of the plug at the base, it should be a rather tight squeeze for the second half.
Use:
Place your desired dose of DMT on a rolling tray or similar object, this dose must be 35mg or less or the spice will burn. Start with half your normal breakthrough dose, this method is very effective when used correctly and will work better for smaller doses. I can break through fully on 20mg with this method. Heat up the skinnier end of the plug with a lighter while holding the fat end, then roll the hot half of the plug in your portioned spice, this should immediatly melt all the spice onto the plug but you can hold the plug to the side of a lighter flame if it is not fully melted. Insert the skinny end of the plug into the pipette until the fat end is flush with the bottom. Now, holding the pipe perfectly vertical (you will have to sit up) and holding a lighter flame about four inches below, begin to inhale. It is incredibly important that you did not put too much spice on the plug and that you do not hold the flame too close, these two things are the easiest way to burn your spice. It is also crucial to keep the flame on through the entire inhale which should take ten to fifteen seconds, obvoisly you must then hold it in for as long as is confortable. I am convinced that the reason so many people struggle with vaporizing DMT is that they are loading too much and then burning half of it or loading to much and not vaporizing half of it, this method eliminates both of those possibilities with the correct technique. Patience is key here, start with a small amount of spice and the flame much further away than you think you want and work your way up with both over multiple days. You may not break through the first few times, but once you master it you will break through in one hit every time.
There you have it, a cheap, effective one hit breakthrough: the micromachine!
Much love,
--Tryptamine Enthusiast
I have been gifted so much wonderful knowledge from the nexus so I figure it is high time I gave something back.
The following is the easiest to make makeshift DMT pipe. While this pipe likely does not rival the e mesh or gvg in terms of ease of use, it is much cheaper, easy to make, and will save you tons of spice due to its efficient and complete vaporization. This pipe is capable of sending users straight past hyperspace and into the void in one hit of nnDMT
The theory
One does not need much DMT to breakthrough, so why is it that the conventional wisdom is that you need three hits? Well, it is because we are consuming a large amount of air with our DMT vapor and even then we are not fully filling our lungs. The GVG and the machine are great but they both have large openings on both ends which let a large volume of air pass through leading to the requirement for multiple lungfuls and expensive torches. Additionally the GVG is quite pricey and the machine requires drilling into glass--somthing many do not have the equipment for. People have reported one hit breakthroughs on the emesh vaporizer but the price tag for it is quite large. What if there were a cheap and effective way to continuously vaporize DMT at the perfect rate while limiting airflow only to what is needed to carry the DMT into the lungs so that the spice can be vaporized in one long concentrated hit?
Now introducing: The Micromachine!
Materials:
1. One 150 mm borosilicate glass Pasteur pipette ($0.50-$20)
I get singles from a chem hobby shop near me for 50 cents each, but you can find bulk boxes online for about $15 per 100 count and then you will never have to worry about breaking your pipe. See the reference image above for what they look like
2. Core boy or similar thick copper scouring pad ($2.50-$5.00)
Must be thick enough not to burn, nobody wants to inhale metal oxides
3. Disposable BIC or similar lighter ($1-$4)
The one-hit void breakthrough mentioned above used a kitchen match so a disposable lighter is more than enough
4. That's literally it!
Assembly:
Cut off a small portion of the copper scouring pad (enough to make a plug 20mm long and 5mm wide--see above) make the plug by squeezing the material with your fingers, it should be slightly conical so that one end is a bit fatter. Then, using a lighter, fully burn off any coating or machine oil, this should not be an issue if you are using the right scouring pad but it is always better to be safe. Place said plug in the wide end of of the pipette with the wide end of the plug at the base, it should be a rather tight squeeze for the second half.
Use:
Place your desired dose of DMT on a rolling tray or similar object, this dose must be 35mg or less or the spice will burn. Start with half your normal breakthrough dose, this method is very effective when used correctly and will work better for smaller doses. I can break through fully on 20mg with this method. Heat up the skinnier end of the plug with a lighter while holding the fat end, then roll the hot half of the plug in your portioned spice, this should immediatly melt all the spice onto the plug but you can hold the plug to the side of a lighter flame if it is not fully melted. Insert the skinny end of the plug into the pipette until the fat end is flush with the bottom. Now, holding the pipe perfectly vertical (you will have to sit up) and holding a lighter flame about four inches below, begin to inhale. It is incredibly important that you did not put too much spice on the plug and that you do not hold the flame too close, these two things are the easiest way to burn your spice. It is also crucial to keep the flame on through the entire inhale which should take ten to fifteen seconds, obvoisly you must then hold it in for as long as is confortable. I am convinced that the reason so many people struggle with vaporizing DMT is that they are loading too much and then burning half of it or loading to much and not vaporizing half of it, this method eliminates both of those possibilities with the correct technique. Patience is key here, start with a small amount of spice and the flame much further away than you think you want and work your way up with both over multiple days. You may not break through the first few times, but once you master it you will break through in one hit every time.
There you have it, a cheap, effective one hit breakthrough: the micromachine!
Much love,
--Tryptamine Enthusiast
