Catfish John
Rising Star
Hey All
First off, I need to give kudos to Loveall for being an intellectual heavyweight and figuring this TEK out. I wanted to try it out but I'm new to learning about extractions and I wasn't confident. The TEK was brilliant and easy to follow but I didn't understand the 'why' of each step.
So to help myself gain a better understanding I put together this list that summarizes the steps and why you are adding x chemical to y chemical. I'm not a chemical expert and I encourage readers to be critical and point out mistakes I may have made. This list is based on using 100g of MHRB. Thanks again Loveall and I hope everyone finds this as helpful as I did.
1. Mix 150g water with 25g calcium hydroxide in a french press. The calcium hydroxide (also known as lime) serves as an alkaline agent that helps to break down the plant material and release the DMT from the bark. Alkaline agents, such as calcium hydroxide Ca(OH)2 help to separate DMT from plant material by converting the DMT molecule into its freebase form, which is more soluble in nonpolar solvents.
The DMT molecule in its natural form in the plant material is usually found in the form of DMT salts, which are water-soluble and cannot be easily extracted with nonpolar solvents. By adding an alkaline agent to the plant material, the DMT molecule is deprotonated (loses a hydrogen ion), converting it into the freebase form, which is insoluble in water and soluble in nonpolar solvents.
2. Mix in 100g MHRB powder to form a wet stiff consistency. Add water if necessary.
3. Cover paste with around 200g ethyl acetate and stir for 10 minutes. Make sure to stir lightly. Rest for 2 minutes. Ethyl acetate is a solvent commonly used to extract organic compounds from plant material. When mixed together, the ethyl acetate will extract the DMT from the MHRB, resulting in a DMT-containing extract.
4. Decant into a quart mason jar with a paper coffee filter. Squeeze lightly to accelerate decanting. Decanting is a process of separating a liquid from a mixture of solid and liquid. It involves pouring the liquid into another container, leaving behind the solid or sediment at the bottom.
5. Repeat extraction with around 125g of ethyl acetate until extraction jar is full (around 5 or 6 pulls).
6. Chemically dry extract with 50g of calcium chloride CaCl2. Give it a few hours to absorb all the water. Calcium chloride has a strong affinity for water molecules and can easily absorb moisture from the air. When added to an extract, calcium chloride will quickly absorb any water molecules present in the extract, leaving behind a dry and more concentrated product.
7. Weigh an empty jar with a scale that has 0.1 resolution. Decant dry ethyl acetate into a jar through a paper coffee filter. The extract needs to be clear, particle free and without water droplets.
8. Stir in 5g citric acid and 1 tsp water. Extract should cloud. Leave undisturbed for 3 days. When you mix a DMT ethyl acetate solvent with citric acid, the DMT freebase can be converted to its citrate salt form. Citric acid is a weak organic acid that can be used to acidify the DMT solution, lowering its pH and facilitating the conversion of DMT freebase to its citrate salt form.
9. Decant solvent leaving the DMT citrate honey behind. Rinse twice with around 50ml ethyl acetate. Allow to air dry until ethyl acetate smell is not present. One day is recommended. Rinsing with ethyl acetate can be used to remove impurities or contaminants from the extracted DMT solution.
10. Measure jar weight and calculate honey weight.
11. Add 1.3g x honey weight of 50/50 PG/VG to jar and dissolve over a hot water bath.
If the list I posted is accurate I was thinking about turning into a document so anyone interested could print the document and have it as a reference during the extraction. I look forward to any feedback!! Thanks everyone, love you all!!!![Love :love: :love:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
![Beaming face with smiling eyes :grin: š](/styles/default/xenforo/smilies/nexus/unicode/64/1f601.png)
So to help myself gain a better understanding I put together this list that summarizes the steps and why you are adding x chemical to y chemical. I'm not a chemical expert and I encourage readers to be critical and point out mistakes I may have made. This list is based on using 100g of MHRB. Thanks again Loveall and I hope everyone finds this as helpful as I did.
1. Mix 150g water with 25g calcium hydroxide in a french press. The calcium hydroxide (also known as lime) serves as an alkaline agent that helps to break down the plant material and release the DMT from the bark. Alkaline agents, such as calcium hydroxide Ca(OH)2 help to separate DMT from plant material by converting the DMT molecule into its freebase form, which is more soluble in nonpolar solvents.
The DMT molecule in its natural form in the plant material is usually found in the form of DMT salts, which are water-soluble and cannot be easily extracted with nonpolar solvents. By adding an alkaline agent to the plant material, the DMT molecule is deprotonated (loses a hydrogen ion), converting it into the freebase form, which is insoluble in water and soluble in nonpolar solvents.
2. Mix in 100g MHRB powder to form a wet stiff consistency. Add water if necessary.
3. Cover paste with around 200g ethyl acetate and stir for 10 minutes. Make sure to stir lightly. Rest for 2 minutes. Ethyl acetate is a solvent commonly used to extract organic compounds from plant material. When mixed together, the ethyl acetate will extract the DMT from the MHRB, resulting in a DMT-containing extract.
4. Decant into a quart mason jar with a paper coffee filter. Squeeze lightly to accelerate decanting. Decanting is a process of separating a liquid from a mixture of solid and liquid. It involves pouring the liquid into another container, leaving behind the solid or sediment at the bottom.
5. Repeat extraction with around 125g of ethyl acetate until extraction jar is full (around 5 or 6 pulls).
6. Chemically dry extract with 50g of calcium chloride CaCl2. Give it a few hours to absorb all the water. Calcium chloride has a strong affinity for water molecules and can easily absorb moisture from the air. When added to an extract, calcium chloride will quickly absorb any water molecules present in the extract, leaving behind a dry and more concentrated product.
7. Weigh an empty jar with a scale that has 0.1 resolution. Decant dry ethyl acetate into a jar through a paper coffee filter. The extract needs to be clear, particle free and without water droplets.
8. Stir in 5g citric acid and 1 tsp water. Extract should cloud. Leave undisturbed for 3 days. When you mix a DMT ethyl acetate solvent with citric acid, the DMT freebase can be converted to its citrate salt form. Citric acid is a weak organic acid that can be used to acidify the DMT solution, lowering its pH and facilitating the conversion of DMT freebase to its citrate salt form.
9. Decant solvent leaving the DMT citrate honey behind. Rinse twice with around 50ml ethyl acetate. Allow to air dry until ethyl acetate smell is not present. One day is recommended. Rinsing with ethyl acetate can be used to remove impurities or contaminants from the extracted DMT solution.
10. Measure jar weight and calculate honey weight.
11. Add 1.3g x honey weight of 50/50 PG/VG to jar and dissolve over a hot water bath.
If the list I posted is accurate I was thinking about turning into a document so anyone interested could print the document and have it as a reference during the extraction. I look forward to any feedback!! Thanks everyone, love you all!!!
Last edited by a moderator: