-
Members of the previous forum can retrieve their temporary password here, (login and check your PM).
VG VaporGenie: How to use, where to get, advantages, etc
- Thread starter Phaedris
- Start date
A bic has worked great for me with my glass vg. I have had a harder time breaking thru than with a bong....but when it happens ....it's much better. I use a few screens and put the d on some weed or ash works even better. I would load a larger hit and you have to go for it....and by that I mean hit it hard. You can't pussy foot around.....not sure if I wrote a trip report about my best hit on the vg. Just before vines grew in my bedroom I heard a loud pinging sound. I peed in my pants when I left my body.....I became aware of this pulsing light , orange with patterns. When I could feel my body again I realized I was flat out on the floor at the bottom of the stairs. It was a good twenty minutes before I realized I wet myself 
hi
i know exactly what you are talking about… i sed different slieves, just herbs or just spice, copper, and so om--i always used a clean GVG for it, and suddenly a brown liquid filled up in the chsmber eveven over the replacement top i always used a small GVG but after a hit and the liquid came adain, it looked like this, ehich was not even cleanable anmore… i had to use some scrubbingpaper, to get rid of the browm:
imageshack.us
imageshack.us
i contacted the Vaporgenie Website in Canada as this was to a time where yit was only available directly from there and no other shops… i even made a video happening this in detail, but they always told me.. Dude, you have to clean your pipe…" it was clean until a miute before andi started smoking through it,,
They told me that that cant be possible and i struggled more than 3 weeks with tose guys even tslked to the boss of the compsny..they always said, this couldnt happen in any way.. i should use a different lighter maybe… unfortunately i already had an _Arc Lighter and the one VaporGenie sold exactly for thiss deviec.. so they didn't even wanted to help me…
Using Changa made it generally enlight to fire inside the bowl, no vaping possible…
then the video i made they said i made it afake one…. so, threw this 150 US$ thing in the corner using my old machine again… but it doesnt work well with changa… as i prefer changa more than pure pice, i tried it couple of days ago again, and the samething happened… liquid came out of the bowl and turn whole thing brown…
I am done with VapoGenie Products, but would likely use a proper Vaporizer for Changa again… any advice for me, which Vaporizer works cool without combustion of herbs or buildig up brown sticky liquid???
i bought a High-End Product from them, which oviously didnt work the way it should even with the video i made while vaping, they called me a faker and liar…so, if anybody has a great idea for me as a Vaporizer for Changa,no table thing, as Volcano etc, wereso huge, once put on the table you didn't even wanted to move them anymore to a differewnt place, due to size andweight,,, my advice would be.. forget about all tose damn Vaporgenie Pipes.. got a wooden one as well, which exploded in my hands directly infront of my face:
imageshack.us
no support….
so back to machine for spie but i have no proper devie found for smoking changa, rather than in a small bong..so, feel free to contact me giving advice on proper vaping deevice for dhanga, please...
i know exactly what you are talking about… i sed different slieves, just herbs or just spice, copper, and so om--i always used a clean GVG for it, and suddenly a brown liquid filled up in the chsmber eveven over the replacement top i always used a small GVG but after a hit and the liquid came adain, it looked like this, ehich was not even cleanable anmore… i had to use some scrubbingpaper, to get rid of the browm:
vapo1.jpg - Click to see more photos
Store and share all of your images @ IMAGESHACK.com
vapo13.jpg - Click to see more photos
Store and share all of your images @ IMAGESHACK.com
i contacted the Vaporgenie Website in Canada as this was to a time where yit was only available directly from there and no other shops… i even made a video happening this in detail, but they always told me.. Dude, you have to clean your pipe…" it was clean until a miute before andi started smoking through it,,
They told me that that cant be possible and i struggled more than 3 weeks with tose guys even tslked to the boss of the compsny..they always said, this couldnt happen in any way.. i should use a different lighter maybe… unfortunately i already had an _Arc Lighter and the one VaporGenie sold exactly for thiss deviec.. so they didn't even wanted to help me…
Using Changa made it generally enlight to fire inside the bowl, no vaping possible…
then the video i made they said i made it afake one…. so, threw this 150 US$ thing in the corner using my old machine again… but it doesnt work well with changa… as i prefer changa more than pure pice, i tried it couple of days ago again, and the samething happened… liquid came out of the bowl and turn whole thing brown…
I am done with VapoGenie Products, but would likely use a proper Vaporizer for Changa again… any advice for me, which Vaporizer works cool without combustion of herbs or buildig up brown sticky liquid???
i bought a High-End Product from them, which oviously didnt work the way it should even with the video i made while vaping, they called me a faker and liar…so, if anybody has a great idea for me as a Vaporizer for Changa,no table thing, as Volcano etc, wereso huge, once put on the table you didn't even wanted to move them anymore to a differewnt place, due to size andweight,,, my advice would be.. forget about all tose damn Vaporgenie Pipes.. got a wooden one as well, which exploded in my hands directly infront of my face:
bowl.jpg - Click to see more photos
Store and share all of your images @ IMAGESHACK.com
no support….
so back to machine for spie but i have no proper devie found for smoking changa, rather than in a small bong..so, feel free to contact me giving advice on proper vaping deevice for dhanga, please...
adam
Rising Star
can't say I have ever had that happen. What type of lighter are you using? I have 6 screens and lay down a bit of shredded caapi vine and place the xtals on that. I use a vector volt lighter. I have used a bic at first and still never had that happen.
The only thing i can think of is that your exhaling into the pipe, is this the case?
You want a long, deep inhale ideally.
The only thing i can think of is that your exhaling into the pipe, is this the case?
You want a long, deep inhale ideally.
Sykosis
The Seeker
I use a GVG and can't say I've ever had that happen to me, sounds like your loosing some of your spice.
Buy yourself some Volcano vaporizer liquid pads and cut them to fit inside the bowl of your GVG, that should trap anything that tries to escape.
A GVG does take a little practice to get the hang of, but once you do it becomes very easy to get to the level you want. Just take long, slow, steady, deep breaths and try not to heat it too hot.
Buy yourself some Volcano vaporizer liquid pads and cut them to fit inside the bowl of your GVG, that should trap anything that tries to escape.
A GVG does take a little practice to get the hang of, but once you do it becomes very easy to get to the level you want. Just take long, slow, steady, deep breaths and try not to heat it too hot.
General Gypsy
Rising Star
I just bought a new GVG, so I will be watching for any odd behaviour after reading this.
Have you considered replacing your diffuser? Could something be mucking it up and "running down". This is simply me looking at my new one and thinking of how the heck it might get gunked up like yours and hupecat's (if yours is similar).
I sincerely hope you get it sorted.
Cheers.
Have you considered replacing your diffuser? Could something be mucking it up and "running down". This is simply me looking at my new one and thinking of how the heck it might get gunked up like yours and hupecat's (if yours is similar).
I sincerely hope you get it sorted.
Cheers.
General Gypsy
Rising Star
I grabbed a pack of these little ceramic discs that are made of the same material as the diffuser.
In this thread.
If you do not like screen and want to get away from metals completely.
In this thread.
If you do not like screen and want to get away from metals completely.
i gave this up after this email bombardement full of lies.. his went on for weeks.. i have made pdf of each and just counted 23 emails..i finally was offered to order a new Topping for ~30US$, which i then did, full of hope… as didnt fix my problem with the ingstion of the changa inside the bowl, i lay it aside.. nw had some super clean white spice, so made 3 slieves in there, and made a 0.7 mm copper mesh-button, burned the shit out of it with a tirch lighter, fitted perfectly,,,, then heated from outside a bit to make it warm again sprinkled the spice on top and could see it dissolving into the coppermesh-ball.. suddenly i felt that my left hand was becomiing wet and sticky, and noticed this shit hasnt been solved either…Cailieg said:
i have used lots of different lighters, from normal bic to cheap Torch and then spend quite a bunch for a lighter on that Arc-Lighter: http://www.turboflame.co.uk/arc.php
tried different diffusor topping s, one in longer than the other… nothing...
Chaoskampf
Chaos: The Ultimate Order
I've owned over 4 different VaporGenies thus far...they're truly exceptional. I would never take DMT with anything apart from it. It's a must have.
ziggus
Rising Star
Blowurmind
Rising Star
I had a arch turboflame torch lighter :thumb_up: however it broke & while I understand the importance of a good torch lighter IMO it's more about technique so I recently purchased 2 new jet lighters shown in the link below, that I have purchased before & are reliable quality wise however i'm wondering if 2000c is too hot for my GVG?
& while I understand the importance of a good torch lighter IMO it's more about technique so I recently purchased 2 new jet lighters shown in the link below, that I have purchased before & are reliable quality wise however i'm wondering if 2000c is too hot for my GVG?Blowurmind
Rising Star
After reading every page of this thread I decided to buy
to hold me off until I can afford another arco turboflame lighter which costs 45$ because I live in the u.s & our money is used as toilet paper in the uk, if anyone has a cheaper solution to this around 30$ max please :shock: send me the link.
I found a link to this on the forum however looks sketchy to me as they don't even list the amount of heat it produces.
to hold me off until I can afford another arco turboflame lighter which costs 45$ because I live in the u.s & our money is used as toilet paper in the uk
, if anyone has a cheaper solution to this around 30$ max please :shock: send me the link.I found a link to this on the forum however looks sketchy to me as they don't even list the amount of heat it produces.
expandaneum
Rising Star
The one you bought is fine I bought a couple of the dx torch lighters and tested them all I like the honest the most:
Just make sure with the dx lighters that the flame stops directly when you stop pressing the button. You don't want to make fire while you are in hyper space.
take care
Just make sure with the dx lighters that the flame stops directly when you stop pressing the button. You don't want to make fire while you are in hyper space.
take care
richard_hole
Rising Star
A friend tells me that putting a non-reactive metal mesh disc in the VaporGenie may stop DMT falling through the pipe, but it also seems to slow down the vaporization process by a whole lot. It's as if it's not only the pipe which has to heat up, but the metal mesh disc also, so it takes longer.
He finds it easier to bed the pipe with some changa, or if you don't have changa, he hears parsley works also.
But then this could also be down to his technique of smoking.
He finds it easier to bed the pipe with some changa, or if you don't have changa, he hears parsley works also.
But then this could also be down to his technique of smoking.
HumbleTraveler
Rising Star
After reading that Gibran2 switched over from his copper scrubbers to the ceramic flavor discs, I swear I saw him mention somewhere that he does NOT place the ceramic disc on top of the SS screen; he removes the SS screen and places the ceramic disc in with no screen below it. Then I read elsewhere that he said "no need to remove the SS screen".
Can he or anyone confirm that the SS screen is to be removed and just the ceramic disc is placed in the GVG?
As a second question, when you unbox your GVG there is a little SS screen in the bottom section. Is this what is removable or does it always stay? I see some of you have said that you use multiple (4 - 9) screens and place the freebase on top of the screens. When you put these screens in, are they supposed to be pushed down past the tapered glass section and sit on top of the screen thats already in there, or do they sit in the section just below the glass bushing where the neck is tapered where the glass transitions from gritty to smooth?
Can he or anyone confirm that the SS screen is to be removed and just the ceramic disc is placed in the GVG?
As a second question, when you unbox your GVG there is a little SS screen in the bottom section. Is this what is removable or does it always stay? I see some of you have said that you use multiple (4 - 9) screens and place the freebase on top of the screens. When you put these screens in, are they supposed to be pushed down past the tapered glass section and sit on top of the screen thats already in there, or do they sit in the section just below the glass bushing where the neck is tapered where the glass transitions from gritty to smooth?
dmt_spider
Rising Star
I'd like to know if that original screen is removable easily as well. I tried for a couple of minutes with a pair of tweezers to remove it and it seems pretty difficult.
