Visual results of MDMA crystal cleaning

[NamRa]

In this topic I want to show the result of cleaming MDMA with Le Junk's acetone wash.

Actually it was my neigbohrs cat who got the story from a lizard and pushed me to show it here.

The story goes he had done some washes with different material and had various results, meaning a loss of mass between 50 and 18 %
This was a cleaning with 18 % loss

The lizard somehow maneged to make some pictures.

The original source, the result but also the residu that was left in the wash, was desolved in the acetone.
I am amazed with the lizards results, The cleaned MDMA is almost pure white.

 

[Curiouskid]

I kind of worry about my cat and his safety often, any procedure for these results?

Thanks for the info anyway

 

[endlessness]

Thanks for sharing the clean up.. What was the ratio of acetone to mdma? Was it cold, room temperature? Was it dry acetone? Did you shake a lot or just do a more superficial wash? Can you detail the proceedure?

One thing that im unsure though is how good it is that youre posting this big quantity of MDMA... I will give you the benefit of the doubt here but it gives the impression you're selling, which is big no-no here.. And if you're not selling, then thats a lot of MDMA.. If thats only for personal use, I suggest you really spread out your use a lot because using MDMA very regularly is really not healthy.

 

[NamRa]

Ok I removed a picture dont want to make a wrong impression.

I will get back about the procedure of this tek

 

[Purges]

Pics are still there Very interested in the TEK though

 

[NamRa]

without any point of reference the lizards opinion is these masses shown are actually very tiny.

If the pictures need to go I am shure a mod will tell me so.

 

[endlessness]

Thanks NamRa, now its fine... My worries for your own safety are there of course, but im sure you are well aware and will take care of your health and safety, right? And yeah please do give us details on the clean up when you have the info and some time

 

[dtrypt]

...but it gives the impression you're selling, which is big no-no here...

that would be a first though - a dealer who actually purifies his product as opposed to cutting it!

 

[Purges]

LOL! :lol:

 

[NamRa]

@ endlessness

Yes I am fully aware of all aspects of this material.
In my twenties there has been a period of abuse.
After a few years I realised I was a weekendjunky and completely changed my ways towards MDMA.
It ws not about dramatic high dosing it was about being drained and getting emotionally flattened.

These days 0.05 g purified is quite something. Even 0.02g works well.
I am in a extreme sensitive stage of my life so carefullness is always there.

Hangovers seem to less with purified but of course my dosages are quite low.
Anyway, when looking and touching the residu it very good that this stuff is not getting in my body.

 

[endlessness]

I can imagine.. Good to know you're conscious about it !

I wonder how that MDMA would test for purity. I think its good to try to purify the things we consume

 

[NamRa]

How to clean MDMA.

This tek can be done with pills or crystals.
In this tek I will talk about 1 gram of MDMA crystals.

Crush and grind the material with a spoon the finer the better.
Use about 15 to 20 ml of dry acetone, it can be at room temp but I prefer as cold as it can get, meaning coming from the freezer.
Put the acetone in a glass than add the fine powder. Could be done reverse but then its posible some MDMA dust could fly out when the acetone is poured in.
Stir the solution for about 3 to 5 minutes. Stop stirring place a cap on the glass to prevent evaporation and keeping dust out.
Wait for all the solids to settle down.
Pull out as much of the acetone you can with a high grade plastic syringe (with or without needle) that doessent get affected from contact with acetone.

Repeat this step again.

Take a coffee filter put it on a glass maybe cut it so it fitts nicely.
Put another 15 ml acetone in the glass and stir it upp and pour it over in the filter.
If any solids are left add a little acetone and repeat. May you could use the syringe again.
Put somethin on top of the glass the prevent evaporation. If you like you can pour extra acetone in the filter to continue washing.
When there is no more drips of acetone falling pick upp the filter and close it.
Take some toiletpaper put it on and under the filter and press so it will absord the acetone left.

Now you can choose.

Compress the powder to end upp with a rock or scrape out the powder and spead it out on some glass.
take a credit card or so chop it and spread it out as much as possible
I prefer powder the rock shown was just an experiment.
If you go slow leave it for 24 hours for all the acetone to evaporate.
If you want fast put the the glass with powder in a 50 c oven, make shure there is no fan blowing in the oven thats not what you want.
Leave it for about 10 minutes. Take it out let it cool, go ahead and smell if there is any tone left.

For the rock it takes longer to completely dry.

There you have it an easy way to clean MDMA.
If you want to see what you pulled out you just have to let the tone you used and collected during the washes evaporate.
At first the residu will be oily scrape it and let it dry.

Bye bye bad stuff, welcome clean MDMA.

Be aware you have just concentrated your MDMA.
adjusting your dosage is a wise thing to do.


Enjoy

 

[endlessness]

Thanks for that

The only suggestion I make is not to use plastic syringe but rather glass one, or glass pipette if possible. If you want to clean MDMA, you dont want to add other possible outside variables (like plastic or phthalates).

Vacuum filtering is a very good way to dry but not always available. A hair drier could also work to dry the crystals.. Just remember acetone is flammable, so for sure no gas oven, and make sure electrical ovens or drier have no sparks.

 

[dg]

neat

you could also crash out clear/pure crystals from ipa/acetone,
(or so i've been told)

 

[endlessness]

Yeah I guess just like with DMT fumarate, one could warm up the acetone/IPA till it dissolves the MDMA and then put it in the freezer to crystallize again (or let it cool slowly for nicer crystals).

Maybe also freebasing the MDMA, pulling with acetone and adding FASA could crash out some nice MDMA fumarat crystals

 

[NamRa]

well, I might go and try to make crystals.
When I look at the cleaned result and dont get any feel of crystals it just looks like powder to me.

 

[Phlux-]

try a mek re-x(much like for mescaline) - you can replace some of the water with ipa if u want.
doing it slow with the correct ratio makes clear shards of excellent geometry.

 

[NamRa]

For real, I have just started and I have no mek or ipa.
When I have it I will get back to your suggestion plux.
For now its acetone.

I have a series of pictures. Some years ago I found a woman on the internet who had a special kind of microsope (cant remember but shure some of you do know) and made pictures for people.
So I send her some grains of the cleaned MDMA and she made several pictured
Here is an example.
She told me she never had a something under her microscope htat would give some many colors.
Then she asked me, what is it ?? MDMA, wow that really great, she said


Should I post them all in this topic or is there a better place in the forum ??

 

[benzyme]

polarization darkfield microscopy.
all crystalline compounds give off characteristic light diffraction patterns, MDMA is no different.


here's one for DMT

 

[endlessness]

Cool, thanks for sharing NamRa