ACRB Tek & Equipment for an aspiring noob

[Sore]

I'd like to thank everyone in advance for putting in their two cents, knowledge and experienc

I will do my best not to ramble and should also apologise in advance I have tapped my bottle of single malt so will do my best to produce cohesive sentences...excuses excuses bla bla in saying that I have the deepest respect for DMT and in the people patient enough to create something from nothing.





Two slight issues, I cannot obtain Naphtha or Mimosa which is okay however I know Acacia confusa can be difficult to work with for a noob when trying for crystals so am open to compromise, changa would be a beautiful compromise with its own set of problems however.

I have done far to much research and consideration at this point I cannot make up my mind on anything and absorbed far to much in a short time span resulting in 6+ txt documents of solvents, equipment, terminology, guides/tek so would really appreciate someone steering me in the right direction.

My thoughts in short are MAO (Syrian rue) + Acacia confusa neither of which I have acquired but am able to get with some ease but what on earth should I do it? Which of the many Tek should I choose?

I would like to do a 50g test run first then a 200g aiming for the purest base possible whether it be crystal or goo preferably crystal seeing as everyone say it takes a slight bit more effort to produce.

 

[Sore]

Just realised I posted in the wrong section sorry :x

 

[Running Bear]

Hexane, heptane, octane, nonane, decane also work, they're all NPS.. im sure if you look in the wiki you will find something that you can understand. If its acacia i would do a a/b hybrid salt extraction with a mini a/b at the end. Then maybe even learn how to re-x. Im sure if you go to the chat room someone will help you.

 

[Sore]

Hexane, heptane, octane, nonane, decane also work, they're all NPS.. im sure if you look in the wiki you will find something that you can understand. If its acacia i would do a a/b hybrid salt extraction with a mini a/b at the end. Then maybe even learn how to re-x. Im sure if you go to the chat room someone will help you.

Cheers mate I did consider "Cybs Hybrid ATB Salt" tek with a slight change here and there, I will pop into the chat actually not sure why I didn't consider it *shaking my head*

 

[AcidShard]

Ronsonol lighter fluid should be easy to find wherever you are. It's naphtha.
I definitely second cybs salt tek for acrb, works great, just do a mini a/b after.
I have never gotten goo with this tek and solvent for acacia.

Good luck!

 

[sendokon]

Mini a/b was the fix for me when i had troubles w cybs.

 

[Sore]

Ronsonol lighter fluid should be easy to find wherever you are. It's naphtha.
I definitely second cybs salt tek for acrb, works great, just do a mini a/b after.
I have never gotten goo with this tek and solvent for acacia.

Good luck!

Appreciate you guys taking the time and helping out.

After a quick test on a few solvents using a mirror it seems I will have trouble sourcing any quality solvent in Australia

Had a look into Ronsonol and can't locate any local or legally sourced stuff as it would need to be shipped here but I did a look into petroleum ether and seems like the most convenient/similar thing available is "Diggers brand Shellite" although I've heard people have trouble with it.

Any idea how I would make Hexane, Heptane, oxane and all the "ane's"?

 

[Sore]

Mini a/b was the fix for me when i had troubles w cybs.

I will keep that in mind mate thanks but if you don't mind me asking what ingredients did you use?

Already know I will have some problems out of the gate if I use some of the solvents I just tested :/

 

[Nope]

If you cannot get pure materials do not attempt an extraction. You have to find a way to get them or switch your goals. I have no experience with acacia but I imagine if you got creative you'd find a way to make a drinkable brew out of it if you can get Syrian rue as well.

No pure chemicals=find a (safe) method you can do with what you have available or find a way to grow mushrooms or something.

You can easily find reliable companies that will ship you a premade grow kit and inside of 2 months you can have enough mushrooms to launch you anywhere you could get with some of those fancy Salts

 

[pitubo]

I have only one advice for you:

Drop the solvent (alcohol) abuse before performing any extractions.

In fact, you'll be stumbling at the processing stage if you cannot sober up for a period long enough to study, prepare and execute the techniques.

I warn you strongly not to ingest syrian rue nor an extract of its active principles while under the influence of alcohol. Very unpleasant surprises may await you.

 

[null24]

I have only one advice for you:

Drop the solvent (alcohol) abuse before performing any extractions.

In fact, you'll be stumbling at the processing stage if you cannot sober up for a period long enough to study, prepare and execute the techniques.

I warn you strongly not to ingest syrian rue nor an extract of its active principles while under the influence of alcohol. Very unpleasant surprises may await you.

Oh come on! Just having a dram or three of whiskey is not abusing alcohol. And even if our new friend the OP was to have a problem with addiction to alcohol, that kind of 'caring' approach would only succeed in isolating them.

Good luck on your first extraction, ive only ever seen ACRB, its a very rewarding plant to work with and I believe that its difficulties actually serve to make one more intimate withit.

 

[Running Bear]

I have only one advice for you:

Drop the solvent (alcohol) abuse before performing any extractions.

In fact, you'll be stumbling at the processing stage if you cannot sober up for a period long enough to study, prepare and execute the techniques.

I warn you strongly not to ingest syrian rue nor an extract of its active principles while under the influence of alcohol. Very unpleasant surprises may await you.

Oh come on! Just having a dram or three of whiskey is not abusing alcohol. And even if our new friend the OP was to have a problem with addiction to alcohol, that kind of 'caring' approach would only succeed in isolating them.

Good luck on your first extraction, ive only ever seen ACRB, its a very rewarding plant to work with and I believe that its difficulties actually serve to make one more intimate withit.

I agree Null24. It's completely ignorant and needs to stop.

 

[Sore]

I have only one advice for you:

Drop the solvent (alcohol) abuse before performing any extractions.

In fact, you'll be stumbling at the processing stage if you cannot sober up for a period long enough to study, prepare and execute the techniques.

I warn you strongly not to ingest syrian rue nor an extract of its active principles while under the influence of alcohol. Very unpleasant surprises may await you.

Perhaps you have misunderstood what I meant by testing the solvents or I have misunderstood, I tested the shellite on a mirror to see how well it evaped and if it left and residue etc.

If you were referring to my first post, fair enough. But in all seriousness I never abuse alcohol and take the process of extraction seriously also the research which comes long before ever attempting anything.

I appreciate your concern and the time taken to voice your concerns.

 

[Running Bear]

I have only one advice for you:

Drop the solvent (alcohol) abuse before performing any extractions.

In fact, you'll be stumbling at the processing stage if you cannot sober up for a period long enough to study, prepare and execute the techniques.

I warn you strongly not to ingest syrian rue nor an extract of its active principles while under the influence of alcohol. Very unpleasant surprises may await you.

Perhaps you have misunderstood what I meant by testing the solvents or I have misunderstood, I tested the shellite on a mirror to see how well it evaped and if it left and residue etc.

If you were referring to my first post, fair enough. But in all seriousness I never abuse alcohol and take the process of extraction seriously also the research which comes long before ever attempting anything.

I appreciate your concern and the time taken to voice your concerns.

Don't let him get to you man. It's what he want's.

 

[Sore]

You're a true legend Bear can't thank you enough for being so warm and considerate to a noob such as myself.

I can assure you there isn't much that gets to me I'd like to think Pitubo means well whether it is constructive criticism or not.

Cheers to you also Null24!


I will continue to do research and think I will grow to love this community

 

[Sore]

I have only one advice for you:

Drop the solvent (alcohol) abuse before performing any extractions.

In fact, you'll be stumbling at the processing stage if you cannot sober up for a period long enough to study, prepare and execute the techniques.

I warn you strongly not to ingest syrian rue nor an extract of its active principles while under the influence of alcohol. Very unpleasant surprises may await you.

Perhaps you have misunderstood what I meant by testing the solvents or I have misunderstood, I tested the shellite on a mirror to see how well it evaped and if it left and residue etc.

If you were referring to my first post, fair enough. But in all seriousness I never abuse alcohol and take the process of extraction seriously also the research which comes long before ever attempting anything.

I appreciate your concern and the time taken to voice your concerns.

Don't let him get to you man. It's what he want's.

Seeing as I can't send PM's, here is my response to your PM Bear:
I won't mate cheers for swinging the axe.

If you don't mind me asking how has DMT helped or changed you as a person Bear?

I'd like to think it will help me trust a bit more as a person or just change my state of mind for the better, I won't give you my life story :lol: but essentially a good friend of mine that I'd known the vast majority of my life did something almost unspeakable which resulted in a lot of sleepless nights among other things.

I might even write a book about it one day, I'll be sure to send you a copy on the house if it ever makes it that far haha.

Was also curious if you knew of any good books, just finished Stephen kings "Insomnia".

If you're into long winded documentaries you might like "Zeitgeist".

 

[Sore]

If you cannot get pure materials do not attempt an extraction. You have to find a way to get them or switch your goals. I have no experience with acacia but I imagine if you got creative you'd find a way to make a drinkable brew out of it if you can get Syrian rue as well.

No pure chemicals=find a (safe) method you can do with what you have available or find a way to grow mushrooms or something.

You can easily find reliable companies that will ship you a premade grow kit and inside of 2 months you can have enough mushrooms to launch you anywhere you could get with some of those fancy Salts

I have located what I believe is pure heptane and shellite (naphtha) only took a 5 minute-ish search so once I have a squizz at the MSDS I will know for sure how safe it is.

I also looked at other methods of ingesting but am keen on doing an extract.

A long time ago I attempted to get shroom spores into the country but our Bio-security is pardon my french *clears throat* BATSHIT CRAZY PARANOID SKITZO MANIACAL just recently they destroyed valuable 19th century plant samples the funny thing is that's the second time!

Have a look at the article: https://www.techly.com.au/2017/05/0...eable-plant-samples-from-19th-century-france/

New Zealand banned sending any valuable samples here since the exact same thing happened to them.

Getting anything here is like rolling dice made from nitroglycerine

 

[pitubo]

Oh come on! Just having a dram or three of whiskey is not abusing alcohol.

A dram or three is already beyond the limits for being allowed to drive a car in most countries. Honestly, do you feel that someone should be driving in a state suggested by the words " tapped my bottle of single malt so will do my best to produce cohesive sentences...excuses excuses bla bla "? My memory suggests that you wouldn't.

Common methods of dmt extraction involve the handling of flammable and corrosive substances. Doing such under the influence of incapacitating amounts of alcohol is dangerous. The nexus has a clear policy about harm reduction. I think that my comment was fair and appropriate. So does OP, btw. To be frank, the warnings about the interaction with harmalas come from personal experience.

And even if our new friend the OP was to have a problem with addiction to alcohol, that kind of 'caring' approach would only succeed in isolating them.

I am caring, for OP's safety. And I am not isolating anyone, I am giving sincere advice. What is the true purpose of your moral indignation here?

BTW, apart from the aspect of safety while performing potentially dangerous procedures, there is another reason why I speak up about alcohol abuse. When people drink excessively and then proceed to post to the forum, the quality of their contributions is negatively affected accordingly.

I agree Null24. It's completely ignorant and needs to stop.

Oh hi, it's you again.

 

[Norsern_vind]

If obtaining solvent is a problem, why not opt for formosahuasca instead?

It can be a bit much at times, but far less difficult than a/b or any other tech requiring things that are hard for you to obtain

 

[Running Bear]

Oh come on! Just having a dram or three of whiskey is not abusing alcohol.

A dram or three is already beyond the limits for being allowed to drive a car in most countries. Honestly, do you feel that someone should be driving in a state suggested by the words " tapped my bottle of single malt so will do my best to produce cohesive sentences...excuses excuses bla bla "? My memory suggests that you wouldn't.

Common methods of dmt extraction involve the handling of flammable and corrosive substances. Doing such under the influence of incapacitating amounts of alcohol is dangerous. The nexus has a clear policy about harm reduction. I think that my comment was fair and appropriate. So does OP, btw. To be frank, the warnings about the interaction with harmalas come from personal experience.

And even if our new friend the OP was to have a problem with addiction to alcohol, that kind of 'caring' approach would only succeed in isolating them.

I am caring, for OP's safety. And I am not isolating anyone, I am giving sincere advice. What is the true purpose of your moral indignation here?

BTW, apart from the aspect of safety while performing potentially dangerous procedures, there is another reason why I speak up about alcohol abuse. When people drink excessively and then proceed to post to the forum, the quality of their contributions is negatively affected accordingly.

I agree Null24. It's completely ignorant and needs to stop.

Oh hi, it's you again.

troll in disguise...... sincere advice? Really!? You could have sent him a PM or talked to him on chat but no you wanted to bring him down in front of everyone. Youre never going to be a moderartor or senior member so you might as well stop sucking up. We should all be helping each other not doing this crap!