panoramix
Rising Star
This is an extraction tek. for the best salvia in a simple process.
WARNING; DO NOT USE PLASTIC TOOLS THE ACETONE WIL MELT IT
supplies.
100g salvia leaves
+- 1000 ml acetone
+- 1000 ml naphtha
2x 1.5L jar with lid
100ml container with wight lid
1x oven dish
eye dropper
Extraction
1. smash 100g salvia leaves in a mixer.
2. Put enough acetone in the jar to make it half full.
Let the jar sit for 2 days shake the jar as you walk along.
(onley shake the jar the first day, the 2nd day the leaves will sink to the bottom)
3. Remove the acetone from the jar in to the other 1.5L jar (collection jar).
Be careful that you do drain the leaves in to the collection jar.
4. Repeat step 3 and 4.
5. Now you need the oven dish, late 1/2 of the acetone evaporate on the dish.
Note; if u use freezing acetone you can do stap (2) in 5/10min for eats pull
be careful not to put the dish into direct sunlight.
UV destroys salvinorin A
when it is evaporated you wil have a black wax this is your crude extraction now for the purefacation.
step 1. put the black max 100ml container.
step 2. the first naphtha wash; put enough Naphtha in de container to fill it up. set aside for 30min
using a eye dropper take the top third leare off. care not to dip too deep.
step 3. The 2th Naphtha wash; fill the container up agean with naphtha set aside for 30 min agean.
use the eye dropper take the top third leare off. care not to dip too deep.
step 4. repeat step 3 8x after 2th or 3th wash, you wil se a lear forming on the bottem,
this is the salvinorin.
step 5. pore of the content of de container in a oven dish en let it evaporate.
this is a very strong extraction use onley if you have expiranse with salvia.
if u whant xtals you can disolve de end product in ipa99% head and cool 3-4x and xtals wil form
WARNING; DO NOT USE PLASTIC TOOLS THE ACETONE WIL MELT IT
supplies.
100g salvia leaves
+- 1000 ml acetone
+- 1000 ml naphtha
2x 1.5L jar with lid
100ml container with wight lid
1x oven dish
eye dropper
Extraction
1. smash 100g salvia leaves in a mixer.
2. Put enough acetone in the jar to make it half full.
Let the jar sit for 2 days shake the jar as you walk along.
(onley shake the jar the first day, the 2nd day the leaves will sink to the bottom)
3. Remove the acetone from the jar in to the other 1.5L jar (collection jar).
Be careful that you do drain the leaves in to the collection jar.
4. Repeat step 3 and 4.
5. Now you need the oven dish, late 1/2 of the acetone evaporate on the dish.
Note; if u use freezing acetone you can do stap (2) in 5/10min for eats pull
be careful not to put the dish into direct sunlight.
UV destroys salvinorin A
when it is evaporated you wil have a black wax this is your crude extraction now for the purefacation.
step 1. put the black max 100ml container.
step 2. the first naphtha wash; put enough Naphtha in de container to fill it up. set aside for 30min
using a eye dropper take the top third leare off. care not to dip too deep.
step 3. The 2th Naphtha wash; fill the container up agean with naphtha set aside for 30 min agean.
use the eye dropper take the top third leare off. care not to dip too deep.
step 4. repeat step 3 8x after 2th or 3th wash, you wil se a lear forming on the bottem,
this is the salvinorin.
step 5. pore of the content of de container in a oven dish en let it evaporate.
this is a very strong extraction use onley if you have expiranse with salvia.
if u whant xtals you can disolve de end product in ipa99% head and cool 3-4x and xtals wil form
