Constructing an emesh with today's ingredients?

[space soldier]

Being new to the community I've noticed the emesh is a must have tool for the ultimate one toke wonder. When researching, I've noticed the recommended original equipment used is no longer available or has been updated with new names. I must admit I have never vaped before and I'm a total novice with the vape world. So I put together a list of ingredients I think would make an emesh that's available today, but wanted to put them out here to make sure I'm getting the correct gear. Here's what I think I should acquire:

Geekvape Aegis max 2
Vandyvape Kylin M pro RTA
Vandyvape mesh coil ss316L

Please let me know your thoughts and please share any recommendations for improvement.

 

[TravellingMonkey]

There is the Wotofo Profile RDTA, as well. One of it's selling points is that the tank portion is removeable to make it into a proper RDA. Even has the proper fittings for using a mesh.. I have it attached to my Geekvape Aegis Legend III, and use the VandyVape mesh.

 

[The_Embalmer]

Order some knock offs from wish you don't need an original vandy vape. I had one and gave it away I honestly think the Chinese knock offs work better.




Any mod box that can go up to 30w and can take a tank mod attachment will do.



You want your screen to be a faint red glow in a dark room.


Make sure to premelt spice onto mesh screen with a few clicks,
Set your modbox to 17w power standard mode, then Slowly start inhale before pressing fire button. Continue to inhale softly for 6-7 seconds.



Get micron screen between 150-200.



You're set.

https://www.wish.com/product/mesh-pro-rda-tank-24mm-adjustable-316ss-mesh-coil-atomizer-with-pin-bf-vaporizer-rebuilding-e-cigarette-608bc28f54f9e5e5f74753ea

Vandy Vape Mesh Wire Spools - 5 Feet $7.99

Vandy Vape Mesh Wire Spools presents a performance-ready mesh sheets in a plethora of heating elements that caters to mesh rebuildable platforms, featuring KA1 Mesh Wire, Ni80 Mesh Wire, and SS316L Mesh Wire Roll.

www.elementvape.com

Attached some pictures that I could find from some of the emesh's I've owned to give you an idea that it doesn't have to be a specific set.

For awhile there I was building them for others just for fun.

 

[built2chill]

Being new to the community I've noticed the emesh is a must have tool for the ultimate one toke wonder. When researching, I've noticed the recommended original equipment used is no longer available or has been updated with new names. I must admit I have never vaped before and I'm a total novice with the vape world. So I put together a list of ingredients I think would make an emesh that's available today, but wanted to put them out here to make sure I'm getting the correct gear. Here's what I think I should acquire:

Geekvape Aegis max 2
Vandyvape Kylin M pro RTA
Vandyvape mesh coil ss316L

Please let me know your thoughts and please share any recommendations for improvement.

My set up of easily acquirable materials:
(As of 1/1/2025)

-GeekVape m100 (local shops)
-Stainless Steel mesh 100microns
-drip tip
-RDA

 

[yatyas314]

Order some knock offs from wish you don't need an original vandy vape. I had one and gave it away I honestly think the Chinese knock offs work better.




Any mod box that can go up to 30w and can take a tank mod attachment will do.



You want your screen to be a faint red glow in a dark room.


Make sure to premelt spice onto mesh screen with a few clicks,
Set your modbox to 17w power standard mode, then Slowly start inhale before pressing fire button. Continue to inhale softly for 6-7 seconds.



Get micron screen between 150-200.



You're set.

https://www.wish.com/product/mesh-pro-rda-tank-24mm-adjustable-316ss-mesh-coil-atomizer-with-pin-bf-vaporizer-rebuilding-e-cigarette-608bc28f54f9e5e5f74753ea

Vandy Vape Mesh Wire Spools - 5 Feet $7.99

Vandy Vape Mesh Wire Spools presents a performance-ready mesh sheets in a plethora of heating elements that caters to mesh rebuildable platforms, featuring KA1 Mesh Wire, Ni80 Mesh Wire, and SS316L Mesh Wire Roll.

www.elementvape.com

Attached some pictures that I could find from some of the emesh's I've owned to give you an idea that it doesn't have to be a specific set.

For awhile there I was building them for others just for fun.

Do you have a parts list by chance for either of those first two you have pictured. That would be extremely helpful.

 

[The_Embalmer]

Geek Vape AEGIS X 200W Box Mod $79.99

Discover the Geek Vape AEGIS X 200W Box Mod, deploying a AS 2.0 Chipset with 2.4" OLED Display while maintaining IP67 Water / Shock / and Dust resistant signature design.

www.elementvape.com

Geek Vape L200 Aegis Legend 2 200W Box Mod $44.99

Discover the highly anticipated Geek Vape L200 200W Box Mod, featuring a 5-200W output, 12V max voltage output, and utilizes a pair of 18650 batteries.

www.elementvape.com

Sony VTC5A 18650 2600mAh 25A Battery $12.99

The Sony VTC5A 18650 2600mAh 25A Battery offers incredible value and power for your favorite device with competitive amperage output and capacity ratio.

www.elementvape.com

https://www.wish.com/product/mesh-pro-rda-tank-24mm-adjustable-316ss-mesh-coil-atomizer-with-pin-bf-vaporizer-rebuilding-e-cigarette-608bc28f54f9e5e5f74753ea

https://www.wish.com/product/66b9a5704f6b7ed23775a4df?source=search&position=5

Vandy Vape Mesh Wire Spools - 5 Feet $7.99

Vandy Vape Mesh Wire Spools presents a performance-ready mesh sheets in a plethora of heating elements that caters to mesh rebuildable platforms, featuring KA1 Mesh Wire, Ni80 Mesh Wire, and SS316L Mesh Wire Roll.

www.elementvape.com

The blue l200 aegis legend 2 mod box from the videos posted was gifted to me by someone who worked at the local smoke shop I was next to but 200w is pretty overkill although both 200w models ive used work fine, the aegis x 200w with the fancy screen from the pictures was also overkill but was one of the first ones I had built for myself ordered from element vape awhile back and didnt have any problems with it. The tiny blue one with the dragon sticker from the pictures I'm not sure where you'd find that but was a small 100w geekvape product, it was one my friend had laying around and i set up the RDA and screen attachment for them, the aegis solo 2 s100 100w rainbow mod Is the one im currently working with and i find it to be my favorite mod box so far.

Geek Vape S100 Aegis Solo 2 Box Mod $47.99

Check out the Geek Vape S100 Aegis Solo 100W Box Mod, featuring a 5-100W output range, single 18650 battery, and an "A-Lock" system to prevent accidental firing.

www.elementvape.com

Sony VTC6A 21700 4000mAh 30A Battery $13.99

Introducing the new Sony VTC6A, the latest 21700 sized rechargeable battery featuring a nominal capacity of 4000mAh providing ample power.

www.elementvape.com

For the mesh size I usually go with 150mm or 200mm I have used both at this point and both work fine. I haven't noticed much of a difference between the two.



Safe travels

 

[wi29845984375]

Geek Vape AEGIS X 200W Box Mod $79.99

Discover the Geek Vape AEGIS X 200W Box Mod, deploying a AS 2.0 Chipset with 2.4" OLED Display while maintaining IP67 Water / Shock / and Dust resistant signature design.

www.elementvape.com

Geek Vape L200 Aegis Legend 2 200W Box Mod $44.99

Discover the highly anticipated Geek Vape L200 200W Box Mod, featuring a 5-200W output, 12V max voltage output, and utilizes a pair of 18650 batteries.

www.elementvape.com

Sony VTC5A 18650 2600mAh 25A Battery $12.99

The Sony VTC5A 18650 2600mAh 25A Battery offers incredible value and power for your favorite device with competitive amperage output and capacity ratio.

www.elementvape.com

https://www.wish.com/product/mesh-pro-rda-tank-24mm-adjustable-316ss-mesh-coil-atomizer-with-pin-bf-vaporizer-rebuilding-e-cigarette-608bc28f54f9e5e5f74753ea

https://www.wish.com/product/66b9a5704f6b7ed23775a4df?source=search&position=5

Vandy Vape Mesh Wire Spools - 5 Feet $7.99

Vandy Vape Mesh Wire Spools presents a performance-ready mesh sheets in a plethora of heating elements that caters to mesh rebuildable platforms, featuring KA1 Mesh Wire, Ni80 Mesh Wire, and SS316L Mesh Wire Roll.

www.elementvape.com

The blue l200 aegis legend 2 mod box from the videos posted was gifted to me by someone who worked at the local smoke shop I was next to but 200w is pretty overkill although both 200w models ive used work fine, the aegis x 200w with the fancy screen from the pictures was also overkill but was one of the first ones I had built for myself ordered from element vape awhile back and didnt have any problems with it. The tiny blue one with the dragon sticker from the pictures I'm not sure where you'd find that but was a small 100w geekvape product, it was one my friend had laying around and i set up the RDA and screen attachment for them, the aegis solo 2 s100 100w rainbow mod Is the one im currently working with and i find it to be my favorite mod box so far.

Geek Vape S100 Aegis Solo 2 Box Mod $47.99

Check out the Geek Vape S100 Aegis Solo 100W Box Mod, featuring a 5-100W output range, single 18650 battery, and an "A-Lock" system to prevent accidental firing.

www.elementvape.com

Sony VTC6A 21700 4000mAh 30A Battery $13.99

Introducing the new Sony VTC6A, the latest 21700 sized rechargeable battery featuring a nominal capacity of 4000mAh providing ample power.

www.elementvape.com

For the mesh size I usually go with 150mm or 200mm I have used both at this point and both work fine. I haven't noticed much of a difference between the two.



Safe travels

the mesh RDA you sent seems to be out of stock, and I can't find any other ones. for some reason, they seem to not show up on searches on wish.com
would you happen to know any other ones?
it seems to be the same case with the drip tip

 

[61pete]

the mesh RDA you sent seems to be out of stock, and I can't find any other ones. for some reason, they seem to not show up on searches on wish.com
would you happen to know any other ones?
it seems to be the same case with the drip tip

I had 3 items from the seller Zmvape in my cart and all 3 are no longer available.
Mesh Pro RDA as well as a WoToFo Profile RDA.

As you say, searching for RDA's gets nothing, maybe they were the last and not being restocked.

Did a search on 3Fvape for wotofo profile rda and also out of stock.

 

[1Starway7]

Being new to the community I've noticed the emesh is a must have tool for the ultimate one toke wonder. When researching, I've noticed the recommended original equipment used is no longer available or has been updated with new names. I must admit I have never vaped before and I'm a total novice with the vape world. So I put together a list of ingredients I think would make an emesh that's available today, but wanted to put them out here to make sure I'm getting the correct gear. Here's what I think I should acquire:

Geekvape Aegis max 2
Vandyvape Kylin M pro RTA
Vandyvape mesh coil ss316L

Please let me know your thoughts and please share any recommendations for improvement.

almost any mod will work..just get a screw on RDA to hold the mesh
..True E mesh convection !. and ceramic health stone .

 

[The_Embalmer]

I am not sure what is going on, I've not run into this issue before. There are still RDAs around then internet just have to do some digging. I'll report back here if I find anything. Safe travels and much love everyone.

 

[Thinnest film]

I had 3 items from the seller Zmvape in my cart and all 3 are no longer available.
Mesh Pro RDA as well as a WoToFo Profile RDA.

As you say, searching for RDA's gets nothing, maybe they were the last and not being restocked.

Did a search on 3Fvape for wotofo profile rda and also out of stock.

I've been on a quest to find a suitable mesh RDA myself and have come up empty handed until yesterday. I went to the Wotofo website and they have the Profile PS RDA for sale in a couple of colors. I ordered two last night and got a shipping notice this morning. I've seen a post that shows that the Profile PS can be used with a single large mesh.

 

[61pete]

I've seen a post that shows that the Profile PS can be used with a single large mesh.

Yip saw it on the "mintylovesrue" website on google.



I eventually found AosVape on AliX and bought 2 VandyVape Mesh Pro's from him.
But apparently the stock doesnt appear for USA folk.

 

[Thinnest film]

Yip saw it on the "mintylovesrue" website on google.



I eventually found AosVape on AliX and bought 2 VandyVape Mesh Pro's from him.
But apparently the stock doesnt appear for USA folk.

Unfortunately it seems that all vapes have been hidden from US buyers there. I'm pretty sure that I can get the Profile PS to work. I think I'll pull that center post and the ceramic pieces that are intended to press the wick against the mesh. I don't vape and the Profile will be dedicated for spice so I won't mind some potentially irreversible deconstruction.

 

[Thinnest film]

the mesh RDA you sent seems to be out of stock, and I can't find any other ones. for some reason, they seem to not show up on searches on wish.com
would you happen to know any other ones?
it seems to be the same case with the drip tip

I recently ordered the Wotofo Profile P.S. from the Wotofo website. It shipped quickly and I received my order less than a week later. I haven't used it yet, but I've got it ready to go with a fitted mesh.