• Members of the previous forum can retrieve their temporary password here, (login and check your PM).

DMT polymerization

Migrated topic.
I'm not sure if he could have detected oligomers either, but if you read the thread he seemed confident that he did detect them, then realized it was an error and that he 100% did not detect any polymers.






Yes I already received these instructions from you on Reddit and followed your recipe exactly and it did not remove the yellow color for me. I sent you pictures and I think even a video but you never replied to my results. That was the last thing I tried before the zinc and yes, it 100% worked to remove the color. I repeated it 3-4 times and it worked every time the same way.

This is the yellow crystals spinning in the 4 pH water with a shit ton of salt.

View attachment 112866

The solution never got less yellow, even after a couple days on the stirrer.
View attachment 112864

This is the before and after of the zinc reduction:
View attachment 112867View attachment 112868

And filtered:
View attachment 112869
Interesting result. Apologies for not responding on reddit, I'm usually active in the r/mescaline group. Thanks for posting here.

So we have a mystery because, what is being reduced in your case? BW didn't notice any reacted DMT. Also, the mini A/B has worked for me. Maybe your yellow DMT different than what BW of I investigated?

How did your DMT become yellow? Was it simply storage (like me). I store it airtight in the dark, with the original atmosphere in the small jar. Did it see light overtime?


Also, what acid did you use to get to pH4? I have used vinegar, citric, and fumaric acids and got the same result (color disappearing). I add the salt right before the NaOH and Naphtha , not at the begining. In my case the simple acidic water changed color before adding the salt within a day - that is a detail I should have mentioned.What do you mean by a ton of salt? Was it 10%?

What was your DMT concentration in the acidic water?

Did you track the pH before and after the color change?

Did you notice any bubbles after adding the zinc?
 
I appreciate you showing interest and taking the time to ask some questions. I've long been confused and in need of help figuring this out.

So we have a mystery because, what is being reduced in your case? BW didn't notice any reacted DMT. Also, the mini A/B has worked for me. Maybe your yellow DMT different than what BW of I investigated?
I'm not sure what is being reduced. I assumed N-Oxide, but the lab I sent it to for analysis wasn't actually screening for that so I still don't know. Benzyme believes it's the electron autoxidation that is being reduced -- pure, electron deficient, yellow DMT gaining some electrons and restoring it's colorless state. I admittedly don't understand it but he says it's a common property of tryptamines. He hasn't sold me on it yet.

How did your DMT become yellow? Was it simply storage (like me). I store it airtight in the dark, with the original atmosphere in the small jar. Did it see light overtime?
It was yellow from the very first pull. I reused the naphtha and it turned more and more yellow. Precipitated yellow powder. Then I went mad for two years trying everything but nothing affected the color until Zinc. It was going to be the first thing I tried lol, but very knowledgeable people here have been skeptical and wrote off the oxide so it was the last thing I tried. I sent the yellow and colorless off for testing and they came back 99.7 and 99.9% respectively. So whatever the yellow is, it was very trace, but there from the beginning and through every acidic solution, np solution, benzoate crystals, freebase crystals, all yellow.
IMG_0769.jpegIMG_0095.jpgIMG_0117.jpg
1. crude freebase 2. recrystallized benzoate prisms 3. freebase long prisms
Video: freebase short prisms
View attachment VID_0060.mp4

I've had the yellow in storage for a year now (amber jar at room temp) while researching how to remove the color. It doesn't look any different now, although there is more of an odor than when I first sealed it.

While working with the yellow I got crystals accidentally. If you look on the previous page where I talk about it in depth, these crystals grew from liquid DMT that coagulated into an orange oil after rapidly crashing out. The oil was left overnight between the alkaline water and hexane above it, open air. The next day the hexane was evaporated I believe, and the oil layer was gone with these yellow crystals floating around on the water.
IMG_0833.jpegIMG_0080.jpgIMG_0066.jpg
These were stored the same way in an amber jar next to the others. Only these have browned significantly over the past year. No idea why they would age differently. The third image above is of a bicolored crystal, perhaps one half was growing into hexane and the other growing into water or air. It's in the bottom left below. The yellow has browned a lot, I guess the lighter half hasn't darkened much though.
IMG_1520.jpeg
Also, what acid did you use to get to pH4? I have used vinegar, citric, and fumaric acids and got the same result (color disappearing). I add the salt right before the NaOH and Naphtha , not at the begining. In my case the simple acidic water changed color before adding the salt within a day - that is a detail I should have mentioned.What do you mean by a ton of salt? Was it 10%?
I used vinegar per your recommendation of organic acid. I believe I did 1g DMT : 100ml 4 pH vinegar (it actually took about 150ml @ ph 4 to totally dissolve the gram) and 10g salt + another 5g later.

I will say it did something. Although it didn't change the color of the solution, I pulled the DMT and threw it straight in the freezer. It grew mostly colorless blades, or less yellow for sure, but there were still areas of yellow, even some yellow goo that seemed to act like nucleation sites for the cleaner crystals. I recovered 90% of the gram which seemed high IMO.
IMG_0299.jpgIMG_0295.jpgIMG_0298.jpgIMG_0300.jpg
What was your DMT concentration in the acidic water?

Did you track the pH before and after the color change?

Did you notice any bubbles after adding the zinc?
When I did the zinc reduction? I believe I did the same, 1g in 100ml, but with HCl. I don't recall tracking the pH or noticing any bubbles, but I was using a mag stirrer so as soon as the zinc was in it was just a tornado of gray water. But I could immediately tell it was colorless water with gray suspension, I was so happy.

IMG_0274.jpgIMG_0351.jpg
Before and after zinc.

Interestingly, after zinc I still got some oil residue in the precipitation dish; and it too was colorless. The entire glass had a thin pattern of oil, but the crystals all had an oil droplet ring.
IMG_0304.jpgIMG_0308.jpg
 
Last edited:
Sorry, I misspoke earlier. In the mini A/B the solution did not completely lose its color for me. It still had some color. I do get white xtlas though. Looks like you did too except from some nucleation spots.

Those could be from DMT in the used naphtha. I think it is best to add the naphtha to the mini A/B before NaOH. Shake well so any old DMT in the map that can go into the water and be in salt form. Then add the 10% NaCl, and the NaOH. NaOH can be added slowly from a pre dissolved solution. Clouds will form in the water, with a magnetic stirrer the freebase will immediately move into the map that. Keep on adding NaOH slowly until clouding stops

That should give white DMT.

I don't know what the metal did for you, but I think we can get white xtals from yellow DMT without using it.
 
Sorry, I misspoke earlier. In the mini A/B the solution did not completely lose its color for me. It still had some color. I do get white xtlas though. Looks like you did too except from some nucleation spots.

Those could be from DMT in the used naphtha. I think it is best to add the naphtha to the mini A/B before NaOH. Shake well so any old DMT in the map that can go into the water and be in salt form. Then add the 10% NaCl, and the NaOH. NaOH can be added slowly from a pre dissolved solution. Clouds will form in the water, with a magnetic stirrer the freebase will immediately move into the map that. Keep on adding NaOH slowly until clouding stops

That should give white DMT.

I don't know what the metal did for you, but I think we can get white xtals from yellow DMT without using it.
That’s exactly what I did to protect the freebase, pooled fresh heptane above the acidic water and dropped lye solution one drop at a time while stirring until precipitation was done.

You can see my results in pictures. The zinc reduction immediately and 100% removed the color, and your process did not. idk how you can deny that.

And all you do is state what you think should work, and what you think is happening, instead of showing any evidence of it yourself. Lets see your before and after pics, your test results. Idk why it’s on me to perfectly replicate YOUR process.
 
That’s exactly what I did to protect the freebase, pooled fresh heptane above the acidic water and dropped lye solution one drop at a time while stirring until precipitation was done.

You can see my results in pictures. The zinc reduction immediately and 100% removed the color, and your process did not. idk how you can deny that.

And all you do is state what you think should work, and what you think is happening, instead of showing any evidence of it yourself. Lets see your before and after pics, your test results. Idk why it’s on me to perfectly replicate YOUR process.
It is not on you necessarily, just suggesting what I think it is a good way to test things further based on what I did before to try to figure out what is going on. You don't have to do anything.

I did post some pictures of my results earlier on this thread. I'm re-summarizing them here for you if you want to try to figure this out together.

I do not deny that the zinc cleared the color of the acidic water. I think that is very interesting. However, we don't know why, right? If BW didn't find any oxides , so if that holds for your material, it is not a reduction of the oxygen. Maybe it is something more subtle. But I think we agree that it is not required to get mostly white xtals back.

Your mini A/B was almost a complete success getting white xtals back. I wonder if it was from DMT aged in the Naphtha if you are reusing it.

It could also be caused by small water droplets in the Naphtha.

I think everything needs to be near perfect to not get any DMT oil (if that is the goal, some don't mind it).

If you want to continue troubleshooting I still have a few questions/thought s:

1) Was the Naphtha that re-used? If yes, I suggest shaking the mini A/B while the water is acidic. Or maybe you already did this also? This would pull any aged DMT from the Naphtha into the water and turn it into a salt to "reset" it.
2) Chemically dry the naphtha with magnesium sulfate before the freezer step. This would remove any potential microscopic water droplets that could potentially cause DMT oil during freeze precipitation.
3) Check the Naphtha every few minutes. Any DMT oil will precipitate first. You can optionally decant the Naphtha off before white xtals precipitate and save the oil for another extraction + be left with only white xtals from the decanted Naphtha.

It would be interesting to see if even after all this, using zinc gives better results. In my case I only got white DMT when controlling all these factors without the need for zinc.
 
Your mini A/B was almost a complete success getting white xtals back. I wonder if it was from DMT aged in the Naphtha if you are reusing it.

It could also be caused by small water droplets in the Naphtha.
Yea but it should either be a complete success or not right? If it's de-polymerizing, why would it only de-polymerize 90%?

I only used naphtha for the initial extraction. All the cleanup steps I personally did were with hexane. Then I did your A/B and the zinc wash with clean, brand new heptane. I used a hydrophobic PTFE membrane syringe filter on a glass syringe instead of a pipette or whatever to 'pull' the heptane off the alkaline water. The hydrophobic membrane completely rejects small water droplets suspended in the solvent, and lets low viscosity fluids through.

It would be interesting to see if even after all this, using zinc gives better results. In my case I only got white DMT when controlling all these factors without the need for zinc.
You should try the zinc reduction please, if you have any yellow stuff to try it on. Looking back at the pics, you seemed to have a much more oily thing going on that could have been a different problem than whatever was uniformly distributed throughout the crystal lattice in my yellow prisms. But I'm curious what your results would be.

I'll re-read the thread again tonight, and I can try the A/B again with adding the salt just before the NaOH, to see if that makes a difference. I'd say most of your results weren't truly white, but compared to the oil it was a big transformation. And I think it did do something to my crystals, I didn't do a control re-x but I could do that when I try the A/B again. The control will just be dissolved in heptane but otherwise treated the same as the A/B when I crash it out. If you think of any other factors you want to test I can prepare more side-by-side jars.

One has to do an A/B to use zinc anyway, so it would be easy to combine both of these techniques, if they're both found to be beneficial in different ways. I guess I can test that too, salty A/B + zinc.
 
Last edited:
Yea but it should either be a complete success or not right? If it's de-polymerizing, why would it only de-polymerize 90%?

I only used naphtha for the initial extraction. All the cleanup steps I personally did were with hexane. Then I did your A/B and the zinc wash with clean, brand new heptane. I used a hydrophobic PTFE membrane syringe filter on a glass syringe instead of a pipette or whatever to 'pull' the heptane off the alkaline water. The hydrophobic membrane completely rejects small water droplets suspended in the solvent, and lets low viscosity fluids through.


You should try the zinc reduction please, if you have any yellow stuff to try it on. Looking back at the pics, you seemed to have a much more oily thing going on that could have been a different problem than whatever was uniformly distributed throughout the crystal lattice in my yellow prisms. But I'm curious what your results would be.

I'll re-read the thread again tonight, and I can try the A/B again with adding the salt just before the NaOH, to see if that makes a difference. I'd say most of your results weren't truly white, but compared to the oil it was a big transformation. And I think it did do something to my crystals, I didn't do a control re-x but I could do that when I try the A/B again. The control will just be dissolved in heptane but otherwise treated the same as the A/B when I crash it out. If you think of any other factors you want to test I can prepare more side-by-side jars.

One has to do an A/B to use zinc anyway, so it would be easy to combine both of these techniques, if they're both found to be beneficial in different ways. I guess I can test that too, salty A/B + zinc.

About the ~90%+ conversion to white xtals from yellow DMT:

We don't know what the yellow DMT is exactly. We don't think it contains DMT Oxide because of BW's analysis.

It could be 90%+ pi-pi ring stacked oligomers that acidic water can break apart and a few % of something harder to separate (such as the election pair exchange that benzyme mentioned). If the acidic water cannot reset the electron exchange, and the zinc can, then the zinc is necessary.

Or yellow DMT icould be all simple oligomers that the acidic water resets. In that case, the small amount of oil from the mini A/B could form a small amount of oligomers forming after the pull - but this would affect the zinc process as well.

A split converting yellow waxy DMT to white xtals with an (1) ideal A/B with and (2) same as (1) but with zinc added would be very interesting. All other parameters matched. If the result is consistently better for (2), then we can say that zinc is doing something specific to a small fraction of the DMT that the acid couldn't do. If I get this done one day I will report bacj.
 
Do you have any waxy stuff? My yellow crystals are perfectly dry like sand. But I can try regardless.

I still don’t understand why you think the color would be associated with polymers. I think polymer would present as a texture change—waxy or oily.

The yellow seems like a separate issue that can persist across a variety of textures and solutions.
 
Back
Top Bottom