• Members of the previous forum can retrieve their temporary password here, (login and check your PM).

Easy and Completely Organic DMT/Enhanced Leaf Extraction Tek

Migrated topic.

Mike.Hanks

Rising Star
Merits
42
Materials Needed:
Mimosa Hostilis Root Bark Powder
Sodium Bicarbonate (Baking Soda)
Fresh Organic Mint Leaves
White Distilled Vinegar
190 Proof Grain Alcohol (Everclear or Golden Grain)
Distilled H2O
Several coffee filters

Procedure:
Step 1: Sodium Bicarbonate Conversion
Spread the sodium bicarbonate on a cookie tray and bake in the oven at 400 Degrees for 1 hour. This process will yield Sodium Carbonate, a much stronger, yet harmless base.

Step 2: Mint Leaf Dehydration (Skip this step if you intend to smoke the freebase)
Thoroughly soak mint leaves in distilled H2O to remove any dust particles and place on cookie tray. Set the oven to 180 degrees and bake for approximately 20 minutes until they are dry.

Step 3: DMT freebase extraction
1) Mix the Mimosa powder with excess sodium carbonate (obtained in step 1) and add enough distilled water to make a paste.
2) Let it soak for about 1 hour in the container and shake like your life depends on it whenever possible.
3) Remove the paste from the container and spread in a wide dish/pan and let it dry.

Step 4: 3x Ethanol Pulls
1) Add enough alcohol to the powder for it to be immersed. Place in container and shake every 20 minutes or whenever possible.
2) Let it soak for at least 1 hour.
3) Filter out the ethanol using a coffee filter. Let the ethanol evaporate.
4) Meanwhile, soak the powder that remains in the filter with more ethanol just like in part 1 and 2
5) Repeat part 4
6) Mix all of the alcohol from the 3 pulls together and let it all evaporate
7) A reddish/brown waxy material should be left over

Step 5: Acidification
1) Dissolve the reddish/brownish waxy material in warm white distilled vinegar and filter it with a coffee filter.
2) Discard the filter.
Step 6: Neutralization
1) Add excess sodium carbonate to the vinegar. The solution should “bubble” (CO2 gas).
2) Spread the paste on a plate and let it dry.
Step 7: Final DMT extraction
1) Pull the powder from part 4 in step 6 with ethanol again just like in step 4, except it is not necessary to repeat the procedure 3 times. Once is enough.
2) Filter out the Sodium carbonate and let the ethanol evaporate.
3) You should be left with a whitish crystalline solid. This is the freebase DMT
Step 8: Enhancing the Mint
1) Re-dissolve the DMT in some ethanol and add the dried mint leaves. Let it soak for about 1 hour and let it evaporate.
2) You now should have DMT-enhanced mint that you can you for smoking.
 
To be completely honest, my pet gorilla has not performed this tek to a dot. However, he has tried a similar but simpler method where he got good yields and the effects of DMT were definitely present once you smoked it. The yield is exceptionally high from this tek, about 5%, but he doubts it is pure dmt (probably impurities from the plant). However it definitely works and the materials are really easy to obtain. If you live somewhere where 190 proof alcohol is illegal, you can always use 151 proof everclear but you will need to do more pulls.
 
Imo, this is a straight up plagiarism, down to the claims of a 5% yield from a tek you've admittedly never attempted.

"Extracting DMT with ethanol, vinegar and sodium carbonate"

What gives?

Materials Needed:
Mimosa Hostilis Root Bark Powder
Sodium Bicarbonate (Baking Soda)
Fresh Organic Mint Leaves
White Distilled Vinegar
190 Proof Grain Alcohol (Everclear or Golden Grain)
Distilled H2O
Several coffee filters

Procedure:
Step 1: Sodium Bicarbonate Conversion
Spread the sodium bicarbonate on a cookie tray and bake in the oven at 400 Degrees for 1 hour. This process will yield Sodium Carbonate, a much stronger, yet harmless base.

Step 2: Mint Leaf Dehydration (Skip this step if you intend to smoke the freebase)
Thoroughly soak mint leaves in distilled H2O to remove any dust particles and place on cookie tray. Set the oven to 180 degrees and bake for approximately 20 minutes until they are dry.

Step 3: DMT freebase extraction
1) Mix the Mimosa powder with excess sodium carbonate (obtained in step 1) and add enough distilled water to make a paste.
2) Let it soak for about 1 hour in the container and shake like your life depends on it whenever possible.
3) Remove the paste from the container and spread in a wide dish/pan and let it dry.

Step 4: 3x Ethanol Pulls
1) Add enough alcohol to the powder for it to be immersed. Place in container and shake every 20 minutes or whenever possible.
2) Let it soak for at least 1 hour.
3) Filter out the ethanol using a coffee filter. Let the ethanol evaporate.
4) Meanwhile, soak the powder that remains in the filter with more ethanol just like in part 1 and 2
5) Repeat part 4
6) Mix all of the alcohol from the 3 pulls together and let it all evaporate
7) A reddish/brown waxy material should be left over

Step 5: Acidification
1) Dissolve the reddish/brownish waxy material in warm white distilled vinegar and filter it with a coffee filter.
2) Discard the filter.
Step 6: Neutralization
1) Add excess sodium carbonate to the vinegar. The solution should “bubble” (CO2 gas).
2) Spread the paste on a plate and let it dry.
Step 7: Final DMT extraction
1) Pull the powder from part 4 in step 6 with ethanol again just like in step 4, except it is not necessary to repeat the procedure 3 times. Once is enough.
2) Filter out the Sodium carbonate and let the ethanol evaporate.
3) You should be left with a whitish crystalline solid. This is the freebase DMT
Step 8: Enhancing the Mint
1) Re-dissolve the DMT in some ethanol and add the dried mint leaves. Let it soak for about 1 hour and let it evaporate.
2) You now should have DMT-enhanced mint that you can you for smoking.
 
Back
Top Bottom