-
Members of the previous forum can retrieve their temporary password here, (login and check your PM).
If you're having trouble getting crystals from acrb, use this tek (thick-light)
- Thread starter thick-light
- Start date
JourneyToJah
Free Spirit
- Merits
- 42
This is what I got from the first pull, 1.5gr of nearly white fluff. Thank you TL for the tek.
Peace light and love.
Peace light and love.
Anybody ever get sediment stuck on the side of the extraction vessel after basifying?
I threw in the Lye, it got extremely hot and the liquid expanded.
When everything cooled down sediment was stuck higher sides of the vessel.
Obviously I can't add the NPS here and operate cleanly
Should I just pour everything into a new extraction vessel?
Or is there some easy way to remove the sediment back into the mix?
I've shaken hard for several minutes, left upside down overnight, no luck
Let me know if you guys have any tips.
THANKS!!
I threw in the Lye, it got extremely hot and the liquid expanded.
When everything cooled down sediment was stuck higher sides of the vessel.
Obviously I can't add the NPS here and operate cleanly
Should I just pour everything into a new extraction vessel?
Or is there some easy way to remove the sediment back into the mix?
I've shaken hard for several minutes, left upside down overnight, no luck
Let me know if you guys have any tips.
THANKS!!
Attachments
Void-explorer
Rising Star
- Merits
- 42
what would be the procedure for reducing the stickiness of xtals and in the pan?
oldsoul,
apparently it's to be expected with glass
apparently it's to be expected with glass
Void-explorer
Rising Star
- Merits
- 42
could one use a ceramic pan to avoid the silanol groups from binding? and what would be a good filter technique if twice through clean cloth is ineffective? and isnt the point of the tek to boil while the vinegar is with the bark?
prowlingparadox
Rising Star
- Merits
- 42
Thanks for this tek, it was followed pretty much verbatim: used half the ingredients, shot for a ph of 3. used Shellite, heat bath while mixing and separating it. there were xtals falling out before even finished transferring into separation jar.
can not wate for morning
can not wate for morning
*oneironaut*
Rising Star
- Merits
- 42
Beautiful Odenedo, just beautiful! Looking like a great yield there my friend!
beelzebubba
I can be what I like to see in you and me
- Merits
- 42
I gave it a shot and here's what I got from one boil and two pulls. I followed the tek as closely as I could. Unfortunately my scale only weighs in grams so I have no idea how much is there. The first pull looked a lot more dense than the second, but the second created some neat looking crystals. The first pull was freeze precipitated while the second was mostly left at room temp for about a week. Some of the crystals wouldn't drop at room temp so I stuck two jars in the freezer for a few hours and then let them sit at room temp for a week. It's my theory that I just needed to get a few to crash out in the freezer to help them build themselves at room temp. I really have no idea what i am doing.
First and second pulls
Second pull
First and second pulls
Second pull
Uhhh, I have a question, and honestly I didnt search, BUT, on my last extract, where I followed this tek
-which worked beautifully before, at least yield wise, I was not able to maintain xtals but was not patient either-
combined with cyb's salt addition, which in theory should be great right?
So the bark I used was the same batch as my last extraction, from which I pulled close to or just over a gram of clear to waxy goo,out of 150 grams-(ACRB HA) crystals grew abundantly upon the matrix, but this was my first access to the molecule in ages, so I did not bother to further crystallize-Im cool with goo actually.
Okay, so here we are acouple months later, and I went to perform my next extraction on the remaing 150 grams of the SAME BATCH, same bag, vendor, date of delivery everything, this was part of my original order.
BUT I had been carrying this bag around with me everywhere, for a couple months. It was not in any kind of properly controlled storage. temp fluctuations were nothing more than my body went through so not so much.
Okay, so did the extraction, but changed a few things.
1.Shredded bark by hand instead of freeze thaw cell lysing cycles, which I did for three days the first time.
2. Added kosher sea salt, unmeasured directly into acidified soup, directly prior ( shook the salt to dissolve) to basifying.
3. There was a violent reaction from the basification, and a powerful indole smell was released
4. Let the reacted soup cool a little then added 120ml (I think-the smaller sized bottle of Ronsonol) of naptha
5. Pulled a couple basters worth of naptha, perfectly clean, and this milked up signifigantly upon depositing in a glass. I filmed this, but havent removed ID from the vid-it's really cool looking, but...
6. After this, was having trouble seeing into the thin layer throught he hppe2 jug, and decided to decant into a handy glass jug, which appeared to have at least the required volume.
7. Was decanting, with friend/assisstant holding the funnel actually putting our intent into the jar
:?: and I got distracted and it poured over. We both got a lot of the soup on our bare hands and began running for the vinegar, when we realized there was no burn.:?:
8. So I poured all this nps down the drain ( I know I know, man I feel bad, that wasnt my INTENT at all, ugh) and was unable to find the other bottle of nps to pull with so we just evapped the two basters of milky ps on a dish and ... nothing. There was actually enough for one good entheogenic dose, which I donated to my assisstant.
What the hell, why was the basified soup not hot? We didnt have ph strips, again couldnt find them , her house is a freakin mess. But that stuff was BASIFIED man. It seemed to have neutalized somehow.
I did another pull eventually and evapped the milky nps to the same results.
Why does the spirit evade me sometimes?:shock:
-which worked beautifully before, at least yield wise, I was not able to maintain xtals but was not patient either-
combined with cyb's salt addition, which in theory should be great right?
So the bark I used was the same batch as my last extraction, from which I pulled close to or just over a gram of clear to waxy goo,out of 150 grams-(ACRB HA) crystals grew abundantly upon the matrix, but this was my first access to the molecule in ages, so I did not bother to further crystallize-Im cool with goo actually.
Okay, so here we are acouple months later, and I went to perform my next extraction on the remaing 150 grams of the SAME BATCH, same bag, vendor, date of delivery everything, this was part of my original order.
BUT I had been carrying this bag around with me everywhere, for a couple months. It was not in any kind of properly controlled storage. temp fluctuations were nothing more than my body went through so not so much.
Okay, so did the extraction, but changed a few things.
1.Shredded bark by hand instead of freeze thaw cell lysing cycles, which I did for three days the first time.
2. Added kosher sea salt, unmeasured directly into acidified soup, directly prior ( shook the salt to dissolve) to basifying.
3. There was a violent reaction from the basification, and a powerful indole smell was released
4. Let the reacted soup cool a little then added 120ml (I think-the smaller sized bottle of Ronsonol) of naptha
5. Pulled a couple basters worth of naptha, perfectly clean, and this milked up signifigantly upon depositing in a glass. I filmed this, but havent removed ID from the vid-it's really cool looking, but...
6. After this, was having trouble seeing into the thin layer throught he hppe2 jug, and decided to decant into a handy glass jug, which appeared to have at least the required volume.
7. Was decanting, with friend/assisstant holding the funnel actually putting our intent into the jar
:?: and I got distracted and it poured over. We both got a lot of the soup on our bare hands and began running for the vinegar, when we realized there was no burn.:?:
8. So I poured all this nps down the drain ( I know I know, man I feel bad, that wasnt my INTENT at all, ugh) and was unable to find the other bottle of nps to pull with so we just evapped the two basters of milky ps on a dish and ... nothing. There was actually enough for one good entheogenic dose, which I donated to my assisstant.
What the hell, why was the basified soup not hot? We didnt have ph strips, again couldnt find them , her house is a freakin mess. But that stuff was BASIFIED man. It seemed to have neutalized somehow.
I did another pull eventually and evapped the milky nps to the same results.
Why does the spirit evade me sometimes?:shock:
Nice stoneyone! I love the fact you are able to harvest the rootbark ethically and locally, it is almost like the universe is pointing you towards an extraction.
I should be doing my first extraction on ACRB next week sometime. I have much experience with MHRB but I always went STB and then cleaned up the final product via re-x. This will be my first A/B on NN-DMT containing material, but I have successfully extracted alkaloids from ayahuasca vine, coca leaves, and Peruvian torch via A/B so I am not that worried about the process.
The seller I acquired the ACRB from has excellent feedback so I doubt quality will be an issue.
I've had the chance to smoke synthetic DMT and it was noticeably different (though similar) to MHRB extract so I am anxious to try to ACRB extract and see how it compares to the others.
I also have some nearly pure 5-MeO-DMT laying around I am considering mixing with part of the ACRB extract to make a unique changa.
I should be doing my first extraction on ACRB next week sometime. I have much experience with MHRB but I always went STB and then cleaned up the final product via re-x. This will be my first A/B on NN-DMT containing material, but I have successfully extracted alkaloids from ayahuasca vine, coca leaves, and Peruvian torch via A/B so I am not that worried about the process.
The seller I acquired the ACRB from has excellent feedback so I doubt quality will be an issue.
I've had the chance to smoke synthetic DMT and it was noticeably different (though similar) to MHRB extract so I am anxious to try to ACRB extract and see how it compares to the others.
I also have some nearly pure 5-MeO-DMT laying around I am considering mixing with part of the ACRB extract to make a unique changa.
Anyone had any luck with this confusa extraction without grinding the root bark in a blender? I started with pre-shredded root bark and so far I have froze/thawed it twice while manually breaking it up more with my hands each time. It is in the freezer for a third time now.
I have a blender but I use it every day to make smoothies and I don't want to risk messing it up with the bark.
Anyone think I can still achieve a decent yield with bark broken down manually?
I have a blender but I use it every day to make smoothies and I don't want to risk messing it up with the bark.
Anyone think I can still achieve a decent yield with bark broken down manually?
Similar threads
