• Members of the previous forum can retrieve their temporary password here, (login and check your PM).

Is my graft okay?

HortyCulture

Esteemed member
Joined
Jun 16, 2026
Messages
12
Merits
248
I am new to grafting and my first attempt is Peyote on to a Bridgesii. It seemed to go okay, but it is day 11 and the button is wrinkled and soft to the touch. Is this normal?
It seems to have a good contact all around and otherwise looks okay, albeit with a slight discoloring.

Graft day 11.jpg
 
Put it in a more controlled environment away from too much direct light or very cold temperatures. If you've grafted it successfully it should bounce back fine.
Thank you. I will move it to a more shaded area.
How long does a graft take to finish, approximately?
 
How's the graft doing now? I attempted a similar graft of peyote onto bridgesii but it failed to take. Ime, PC pachanoi ('pachanot') makes a far better grafting stock, although what you have there as a "bridgesii" looks nothing like mine (too many spines per areole, and a lack of longer spines). I'd be inclined to say it might be more in the direction of a macrogonus/peruvianus although I won't lend that as much confidence as the previous statement. Was your specimen - perchance - mislabelled? This may work out in your favour with the graft.
 
How's the graft doing now? I attempted a similar graft of peyote onto bridgesii but it failed to take. Ime, PC pachanoi ('pachanot') makes a far better grafting stock, although what you have there as a "bridgesii" looks nothing like mine (too many spines per areole, and a lack of longer spines). I'd be inclined to say it might be more in the direction of a macrogonus/peruvianus although I won't lend that as much confidence as the previous statement. Was your specimen - perchance - mislabelled? This may work out in your favour with the graft.
The button is still soft, actually softer than before and very wrinkled. It is firmly in place, so i can't pull it off without force, but i can see slightly under one of the sides and it looks like a root is starting to form on the bottom of the button.
It certainly doesn't seem to be taking in any water so in the long run i might end up pulling it off and rooting it in soil. If the root starts to grow out the side then i will take that as a sign. The fact that it is firmly in place makes me a bit nervous to make any decisions for now.

As for the rootstock ID, it was not mis-labelled, but turns out i am an idiot :ROFLMAO: I just checked the pot and it is clearly labelled as "SP" (meaning san pedro, which is how i labelled my Pachanoi), so you are correct, it is not a Bridgesii! It should be a Pachanoi, but it is possible it could be a Peruvianus as i planted Pachanoi and Peruvianus at the same time. They were in different trays, but as we have established, i can be an idiot sometimes. I have no idea why i thought it was a Bridgesii, clearly i was rushing around and not paying attention! The good thing that came from this is you have taught me how to tell the difference, so thank you! :)

What is the result of yours? does the button still stick to the stock? My gut tells me that means it has succeeded, but this is my first ever graft so i have no idea.
I will try to get some pictures up soon.
 
Here is the picture of how it looks now. I tried to get one of what appears to be a root starting to grow between the cacti, but it was far too small and close up to capture.
As you can see a pup is starting to form, which is nice, but not what i intended. The Root of the peyote is also growing a few new pups, which is exciting!
After comparing the two pictures i actually don't think it is getting worse necessarily, just more yellow. I will wait and see what happens.


Grafted Button - 1.5 Months.jpg
 
Sorry, I missed this thread.
How did you graft? What pressure have you used on the scion?
The pup of the rootstock has to be removed. The energy has to be directed to the scion.
What is your relative humidity? Ideal is 50-60. Anything higher can lead to mold or rot and anything lower will dry out the scion.
Keep it in a shade, don't use full sun till the scion plumps up.
If you try to move the scion by fingers (lightly!), does it hold? After a month it should stick quite a lot. If it holds, it should be ok.
 
What is the result of yours? does the button still stick to the stock?
Well, the one on the bridgesii failed so I had to remove it. Currently I'm seeing if it'll take root in damp sand. Both sides of the graft had callussed over. This may have been due to a disturbance occurring in the early stages, so I may yet make another attempt.

The graft to PC pach is doing exceedingly well and is basically a plump pup factory - highly recommended, the growth must be ten times faster than when on its own roots - and it has also flowered recently. Alas, the weather was not suitable for getting a decent picture of the bloom opening fully.
 
Sorry, I missed this thread.
How did you graft? What pressure have you used on the scion?
The pup of the rootstock has to be removed. The energy has to be directed to the scion.
What is your relative humidity? Ideal is 50-60. Anything higher can lead to mold or rot and anything lower will dry out the scion.
Keep it in a shade, don't use full sun till the scion plumps up.
If you try to move the scion by fingers (lightly!), does it hold? After a month it should stick quite a lot. If it holds, it should be ok.
to graft i cut the top off the stock, then the angles down each rib. Then i cut the top off the scion and put it on top. i pulled it down with some cheese cloth held in place mostly by catching on the spines, but also by wrapping some string around a couple of times. There wasn't much tension on there so probably little pressure, maybe i need more? Everything was sanitized with alcohol before.

I will remove the pup. Thank you, i was not aware to do that :) i was excited about it :ROFLMAO:

My RH has probably been all over the place. This was done in a cold frame style greenhouse that was opened and closed daily. It was a very dry summer here though so my guess is it was very low, almost definitely below 50-60%.
I did remove it from direct light when it was suggested by Trip above, but it was around 12 days in full sun before i moved it to shade.

I have tried pulling lightly on the scion and it does hold very well. It still doesn't seem to be plumping up even now after 2 months but it is definitely firmly in place.

maybe now with RH picking up again it will improve. Not a huge loss if it dies though, the root of the scion is bursting with pups :love:
 
Well, the one on the bridgesii failed so I had to remove it. Currently I'm seeing if it'll take root in damp sand. Both sides of the graft had callussed over. This may have been due to a disturbance occurring in the early stages, so I may yet make another attempt.

The graft to PC pach is doing exceedingly well and is basically a plump pup factory - highly recommended, the growth must be ten times faster than when on its own roots - and it has also flowered recently. Alas, the weather was not suitable for getting a decent picture of the bloom opening fully.
Shame about the failed graft, but fingers crossed it should root okay. That's exactly what i will do if mine fails. Cacti are very resilient. I'm also thinking about doing another attempt. My scion roots are pupping like crazy so i think i can get away with risking another top.

Glad your PC pach is going so well! I would love to see flower pictures if you catch it next time! :love:
 
to graft i cut the top off the stock, then the angles down each rib. Then i cut the top off the scion and put it on top. i pulled it down with some cheese cloth held in place mostly by catching on the spines, but also by wrapping some string around a couple of times. There wasn't much tension on there so probably little pressure, maybe i need more? Everything was sanitized with alcohol before.
When grafting a cactus, pressure between the scion and the rootstock is one of the most important factors. The pressure should be as high as possible, but not so high that it damages the scion.
I will remove the pup. Thank you, i was not aware to do that :) i was excited about it :ROFLMAO:
In fact all the grafting is about acquiring and directing of the life energy. Like in normal life. If directed correctly, everything works much better :)
I did remove it from direct light when it was suggested by Trip above, but it was around 12 days in full sun before i moved it to shade.
These plants are extremely resilient, it should be ok
I have tried pulling lightly on the scion and it does hold very well. It still doesn't seem to be plumping up even now after 2 months but it is definitely firmly in place.
The better is the joint, the faster is the start. If the scion holds and looks alive, it probably just needs some time to form the joint.
 
to graft i cut the top off the stock, then the angles down each rib. Then i cut the top off the scion and put it on top. i pulled it down with some cheese cloth held in place mostly by catching on the spines, but also by wrapping some string around a couple of times. There wasn't much tension on there so probably little pressure, maybe i need more? Everything was sanitized with alcohol before.
Here you can see my preferred way. I use elastic electrical tape.
WhatsApp Image 2026-09-13 at 14.10.15.jpeg
 
Back
Top Bottom