Dimethyltryptoman
Rising Star
Here are the pictures, if you wish to learn from a new found master at this glorious art then please message me. I think i've gotten this all the way down to the brass tacks.
-
Members of the previous forum can retrieve their temporary password here, (login and check your PM).
Maximum Yield: Attained.
- Thread starter Dimethyltryptoman
- Start date
Why message you when this forum is made to share knowledge publicly? Or are you afraid that your 'glorious art' is not so glorious after all when it gets peer reviewed by knowledgeable people?Dimethyltryptoman said:
PS: I have removed your avatar since we do not allow insulting images here, please check our Attitude page.
Kind regards,
The Traveler
You have seen OneFive's crystals, yes? I've attached his pic from his thread. As you can see, these are crystals to drool over, and very clean. Humility is a good thing, Mr. Master. I understand being proud of your work, but you'll find there are some truly awesome chemists on this site (me not being one of them). Pride comes before the fall.
What process are you using, if you care to share? And what plant material? After a few Re-X's, your product should be choice, nice job.
What process are you using, if you care to share? And what plant material? After a few Re-X's, your product should be choice, nice job.
Attachments
Many thanks but im am but a humble beginner (i hate word humble) but i am still a beginner.112233 said:
All those lovely snowy crystals have gone to changa heaven :want:
Dymetholtryptoman i think you definitely need to wash your Delta Mike Tango and get rid of that evil yellow jungle stuff. Just my opinion.
HumbleTraveler
Rising Star
If I opened my freezer, and found a dish like that of OneFives...I would faint. I've never fainted before. But I would faint. Thats the posterchild for everything possible working properly hahah. Good bark, good organization, good everything.
BnaiRagshee
Rising Star
I was just browsing active discussions and I saw this post. Curiously I read through the comments and bawawawathefudge 112233! That is a clandestine chemist's wet dream.
yea, some people have really nice xtal pics.
Phlux had some very impressive, highly resolved ones
Phlux had some very impressive, highly resolved ones
changalvia
eat your jungle oats
Maximum yield amounts to...?%
Reflection
Healthy Body = Healthy Mind
WOW!!! OneFives dish is crazy, barely see the glass!!
I do have a question about increasing the amount from each pull.
(My Tek - 100 grams, acrb in 1000 ltr - Lye, Salt - then 100 mls Naphtha.
My question is that I can do 3 separate pulls and they all come out like the above photo.
So why wont all of the DMT go into the first pull? I cant imagine the amount produced leaves the naphtha saturated. I do add 30 grams of salt but maybe I should add more.
Why wont all of the DMT leave the solution on the first pull, what stops it from all leaving or is there anything else I can do to help the transfer?
My photo looks rediclous next to the others
I do have a question about increasing the amount from each pull.
(My Tek - 100 grams, acrb in 1000 ltr - Lye, Salt - then 100 mls Naphtha.
My question is that I can do 3 separate pulls and they all come out like the above photo.
So why wont all of the DMT go into the first pull? I cant imagine the amount produced leaves the naphtha saturated. I do add 30 grams of salt but maybe I should add more.
Why wont all of the DMT leave the solution on the first pull, what stops it from all leaving or is there anything else I can do to help the transfer?
My photo looks rediclous next to the others
Dimethyltryptoman
Rising Star
Okay so since October i've tried this 5 different times.
There is only 1 way. That i have found that works. It involves extreme patience and humility and nothing can be done any faster than the rough time frame i will be giving you.
Step one: Buy 30 Liters of Distilled Water.
Step Two: Buy 7.5 Liters of 10% Acetic Acid//Cleaning Vinegar: aka Allens Double Strength.
and Lye. These two items can be found at the hardware store.
Step Three: Buy 500ML of Naptha and 1L of Toulene.
hidden step: Wal-Mart is still having holiday sales, i got 2 15L pots and 2 collanders, for less than 36 dollars.
Step Four: Use an Industrial strength coffee grinder and emulsify 1kg Acacia Bark into Silt.
Step Five: Have an old white bed sheet, and pour all of your acacia dust into the center of the sheet. Then, cut the sheet to size. You want to bundle up your acacia in the sheet and tie it tight.
Step Six: Acidify 10L of water, with 2.5L of 10% Cleaning vinegar and get it boiling.
Step Seven: Carefully place your Acacia Bundle, into pot A of boiling acidified water.
Step Eight: Let the acacia Bundle boil in the pot with the vinegar for 3 Hours.
Step Nine: In pot B. Place the Bundle of rootbark, into the collander.
Take a second collander and press all of the juice of out the rootbark. Then Pour the remaining liquid you were just boiling, into pot B .
Step 10: Turn the pot B onto simmer.
Step 11:Fill up Pot A which should now be empty, with 10L more water and 2.5 L more vinegar. Place the Acacia bundle back into the pot. Boil for 3 hours. While letting the other pot simmer for 3 hours.
Step 12: By the end of the 3rd hour, your pot B will have gone down at least 3-5 Liters. Your pot A while 12Liter with vinegar, in that 3 hour time frame of boiling, should have gone down, by an amount equal to be able to pour the remaining liquid contents of the Boiling pot into the Simmering pot. If not, just wait this isn't a race.
Step 13: Steps 7 - 12 over again. for a total of 3 times I hope you like Napping, and or Movies.
Step 14: Once you have used all of the water and all of the vinegar. Reduce the contents of Pot B. Down to a Manageable 2500ML.
Step 15: Have 5 Mason jars, fill each jar with 500ML of acidified water.
Step 16: Put 250 - 335 Grams of Lye into each jar, slowly over the course of 20-30 minutes.
Step 17: Put a lid on the jars, and shake the shit out of them. Do a test before hand to make sure the jars seal, would be eaten away by the lye. I'm serious getting this stuff all over your face and hands and arms isn't fun.
Step 17: Once the exothermic reaction has taken place. Into each jar add 200ML of toulene, and 100ML of Naptha, or Ether.
Step 18: Shake these jars once every 15 minutes, until you go to bed, then leave it over night. Sealed. It should be getting late, if you've actually taken a full 8 - 9 hours to do all of this plus the reduction in pot B.
Step 19: In the morning, you will notice, the Naptha Layer, is Piss Yellow, while the Toulene Layer is Almost orange.
Step 20: using this http://www.bbqs.com/images/14950---Injector.jpg which you can order off of the internet. Extract the Naptha layer. Place it into a small glass jar.
Step 21: Extract the Toulene layer Place into a different jar.
Step 22: Once you have successfully migrated all solvents off of the base,
put 20 Grams of Rock salt, into each jar. and add another 100Ml of naptha to each.
You will be extremely surprised at how much you will still pull.
Step 23. Wait. Everything else now is a waiting process. Silica Gel package set around or near your evaporating solvents will help with the time but ultimately the greatest dimethyltryptamine you will get, won't be dry for almost 24 hours if you followed this method down to the brass tacks.
Step 24. Enjoy.
There is only 1 way. That i have found that works. It involves extreme patience and humility and nothing can be done any faster than the rough time frame i will be giving you.
Step one: Buy 30 Liters of Distilled Water.
Step Two: Buy 7.5 Liters of 10% Acetic Acid//Cleaning Vinegar: aka Allens Double Strength.
and Lye. These two items can be found at the hardware store.
Step Three: Buy 500ML of Naptha and 1L of Toulene.
hidden step: Wal-Mart is still having holiday sales, i got 2 15L pots and 2 collanders, for less than 36 dollars.
Step Four: Use an Industrial strength coffee grinder and emulsify 1kg Acacia Bark into Silt.
Step Five: Have an old white bed sheet, and pour all of your acacia dust into the center of the sheet. Then, cut the sheet to size. You want to bundle up your acacia in the sheet and tie it tight.
Step Six: Acidify 10L of water, with 2.5L of 10% Cleaning vinegar and get it boiling.
Step Seven: Carefully place your Acacia Bundle, into pot A of boiling acidified water.
Step Eight: Let the acacia Bundle boil in the pot with the vinegar for 3 Hours.
Step Nine: In pot B. Place the Bundle of rootbark, into the collander.
Take a second collander and press all of the juice of out the rootbark. Then Pour the remaining liquid you were just boiling, into pot B .
Step 10: Turn the pot B onto simmer.
Step 11:Fill up Pot A which should now be empty, with 10L more water and 2.5 L more vinegar. Place the Acacia bundle back into the pot. Boil for 3 hours. While letting the other pot simmer for 3 hours.
Step 12: By the end of the 3rd hour, your pot B will have gone down at least 3-5 Liters. Your pot A while 12Liter with vinegar, in that 3 hour time frame of boiling, should have gone down, by an amount equal to be able to pour the remaining liquid contents of the Boiling pot into the Simmering pot. If not, just wait this isn't a race.
Step 13: Steps 7 - 12 over again. for a total of 3 times I hope you like Napping, and or Movies.
Step 14: Once you have used all of the water and all of the vinegar. Reduce the contents of Pot B. Down to a Manageable 2500ML.
Step 15: Have 5 Mason jars, fill each jar with 500ML of acidified water.
Step 16: Put 250 - 335 Grams of Lye into each jar, slowly over the course of 20-30 minutes.
Step 17: Put a lid on the jars, and shake the shit out of them. Do a test before hand to make sure the jars seal, would be eaten away by the lye. I'm serious getting this stuff all over your face and hands and arms isn't fun.
Step 17: Once the exothermic reaction has taken place. Into each jar add 200ML of toulene, and 100ML of Naptha, or Ether.
Step 18: Shake these jars once every 15 minutes, until you go to bed, then leave it over night. Sealed. It should be getting late, if you've actually taken a full 8 - 9 hours to do all of this plus the reduction in pot B.
Step 19: In the morning, you will notice, the Naptha Layer, is Piss Yellow, while the Toulene Layer is Almost orange.
Step 20: using this http://www.bbqs.com/images/14950---Injector.jpg which you can order off of the internet. Extract the Naptha layer. Place it into a small glass jar.
Step 21: Extract the Toulene layer Place into a different jar.
Step 22: Once you have successfully migrated all solvents off of the base,
put 20 Grams of Rock salt, into each jar. and add another 100Ml of naptha to each.
You will be extremely surprised at how much you will still pull.
Step 23. Wait. Everything else now is a waiting process. Silica Gel package set around or near your evaporating solvents will help with the time but ultimately the greatest dimethyltryptamine you will get, won't be dry for almost 24 hours if you followed this method down to the brass tacks.
Step 24. Enjoy.
Dimethyltryptoman
Rising Star
The reason why i use both naptha and toulene is because.
I want to try to pull as much as possible all within the very initial pull.
I don't care if i am getting the yellow stuff, is really does have effects of it's own.
Plus i've found an amazing synergy between NMT and DMT.
The Naptha Layer, contains more than enough white crystals.
While the toulene layer, is all of the DMT N-Oxide and NMT and Yuremamine
Frankly if i had to make a choice between one, I would smoke the yellow over the white almost any day.
I want to try to pull as much as possible all within the very initial pull.
I don't care if i am getting the yellow stuff, is really does have effects of it's own.
Plus i've found an amazing synergy between NMT and DMT.
The Naptha Layer, contains more than enough white crystals.
While the toulene layer, is all of the DMT N-Oxide and NMT and Yuremamine
Frankly if i had to make a choice between one, I would smoke the yellow over the white almost any day.
Mimosa_Man
Rising Star
What happened The Traveler? Did you throw out his original post?
Reflection
Healthy Body = Healthy Mind
I just realised that I have been missing possibly a crucial step in the Tek, heating the jar once the Lye has been added.
I thought that the boiling process in a ph of 3-4 would pull the DMT from the bark but maybe the heat from the Lye pulls more of the DMT from the bark than the boiling process does, would that be correct?
Just carried out my normal method but left the jar in a hot bath for several hours cooling intermittently after adding the lye, anyway the naphtha pulls seem to be rich in the goods, milky goodness, will wait 2 days before removing from the freezer.
I thought that the boiling process in a ph of 3-4 would pull the DMT from the bark but maybe the heat from the Lye pulls more of the DMT from the bark than the boiling process does, would that be correct?
Just carried out my normal method but left the jar in a hot bath for several hours cooling intermittently after adding the lye, anyway the naphtha pulls seem to be rich in the goods, milky goodness, will wait 2 days before removing from the freezer.
Similar threads
