here again with other questionsThe Sofa Traveler said:
Yes that's it, stiring + light heating. No need to heat too much, around 50°/60° is hot enough to help dissolve. For example, in winter I place the container on refractory stones and let it melt gently, stirring regularly. The rest of the time, I usually put the container in hot (not boiling) water + stiring.ildruido said:
Well, I already tried this, and the result was very average. THC wax doesn't dissolve well, contrary to freebased DMT. It stays mostly oily. It is more or less aerosolizable but it totally ruins the clearomizer, you'll have to boil it long time before it gets clean again (luckily, I have a dedicated clearomizer for this kind of experimentations, so I didn't ruin my spice dedicated clearomizerildruido said:
). It also thickened very much my 50/50 PG/VG base, maybe 100% PG would have been better. Anyway, for this aim, I think (freebase) cannabinoïds would be more suitable. Or just use a wax dedicated material like classical wax pens
The Sofa Traveler said:Hi
Consuming DMT with MAOI is the aim of my setup, that's exactly what I do (syrian rue tea + aerosolized DMT)ildruido said:
Strange, 1g/5.95ml is quite weak concentration. I do 1g/3.5ml and I have no melting issues with this.ildruido said:
I'm surprised that you feel a 3 seconds puff with 1g/5.95ml is too strong. I'm usually more in 5 to 10 seconds puffs. Anyway, "too strong" is not really a problem, just modulate the way you inhale. Are you using 0.3 ohms coils or 0.5 ?ildruido said:
I'm not sure to understand well this question. Anyway, 2 ways to modulate the airflow : 1)the way you inhale ; 2)settle the airflow ring at the top of the clearomizer. Remark in passing : I slightly changed the 4th parameter, 19 -> 17.ildruido said:
Nope, never faced this kind of problem. Maybe it is related to the DMT extraction quality ? Dunno... Maybe try another driptip.ildruido said:
Not being as precise as a weighed spice is maybe the weak point of this ROA but I rarely had accidental overdosing, and it seems unlikely to me with the low concentration that you use. I'm sure that with a bit of practice you'll find your sweet spots.ildruido said:
Not really, from what I read here harmalas doesn't dissolve and aerosolize as well as freebase DMT does, so putting them next to DMT in the same juice seems quite hazardous. Possibly I could put harmalas FB in another clearo but if I do so I'll have to deal with 2 clearos (even 2 mods). Anyway the harmalas e-juice results seem moderately convincing to me for the moment. If I intent to inhaled harmalas I would stick to the smoking ROA. That said I'm happy with harmalas tea and aerosolizing DMT above the 5/6 hours harmalas background it provides, the effects are also like a kind of changa except that the harmalas are ingested. We could call that Mixed ROA e-changa =)ildruido said:Hey man, did you ever considered putting the maoi IN the liquid itself, as well as the DMT?? It could be considered a 'liquid changa'
For the settings I mentionned to be efficient and adequate you have to use strictly the same material, they are not suitable for the supplied standard coils. Those supplied standard coils are not either suitable for TC mode, so it seems you aerosolized at more or less random temperature - and probably too low wattage anyway - since the temperature cannot be calculated properly if the correct/suitable coils are not used. Check your coil first, you have to be 100% sure they are the SS316 0.3ohms (it is written in small on the coil). My settings are only suitable for the Veco Tank clearomizer + SS316 0.3ohms coils, I can't help if you use something else. Also, avoid to add random spice quantites to the juice, too much spice in the PG/VG could lead to vaping issues. Cheerzildruido said:
So for my second batch of liquid I checked the coil and... it was 0.5 so you were right I put the wrong coil in it... shame on meThe Sofa Traveler said:
Cool, pleased you had some good results. For those settings to be a bit more potent, you could do more concentrated juice, for example 1g/3ml or even going under 3ml per gram. If you plan to concentrate the spice gram in less than 3ml PG/VG, go gradually. Keep in mind that 1g/2ml tends to saturate the PG/VG, resulting in poor aerosolization. 1g/2,8ml could be a good deal for stronger effects without affecting the quality of the aerosolization in the time or clogging the coil.ildruido said:
When properly aerosolized (adequate power/temp. & adequate juice concentration) it doesn't occur in what I experienced. My theory about darkening juices is that it comes from burned DMT which builds up around the coil and then eventually dissolves in the remaining juice, fading the color to brown. Otherwise, the ready-to-use juice that I store in a small container (away from light) tends to take on a slightly more yellowish tint over the weeks without having the feeling that the juice is less or differently potent. Same can happen with the juice remaining in the clearo but as far as I am concerned I now avoid filling the clearo completely, I only reload with the quantity needed for a session. In summary : juice fading to brown/dark = burnt particles dissolved in the juice = strange & diminished effects ; juice becoming a bit more yellowish = (I guess) oxidation = I did not notice remarkable changes in effects and potency.Loveall said:
The Sofa Traveler said:When properly aerosolized (adequate power/temp. & adequate juice concentration) it doesn't occur in what I experienced. My theory about darkening juices is that it comes from burned DMT which builds up around the coil and then eventually dissolves in the remaining juice, fading the color to brown. Otherwise, the ready-to-use juice that I store in a small container (away from light) tends to take on a slightly more yellowish tint over the weeks without having the feeling that the juice is less or differently potent. Same can happen with the juice remaining in the clearo but as far as I am concerned I now avoid filling the clearo completely, I only reload with the quantity needed for a session. In summary : juice fading to brown/dark = burnt particles dissolved in the juice = strange & diminished effects ; juice becoming a bit more yellowish = (I guess) oxidation = I did not notice remarkable changes in effects and potency.Loveall said:
Cheerz
ildruido said:UPDATE
I have noticed that after a few weeks the DMT tend to stick to the cotton of the coil and it burn a bit when you inhale; what I do, I soak only the tank (except the airflow) in mildly hot water for a while before every session and it works like a charm every time
interesting, do u use the salt in the ecig liquid as well?Loveall said:ildruido said:UPDATE
I have noticed that after a few weeks the DMT tend to stick to the cotton of the coil and it burn a bit when you inhale; what I do, I soak only the tank (except the airflow) in mildly hot water for a while before every session and it works like a charm every time
I assume you are using free base? I had a issues with free base that sound like this (if I left the free base sit around). I also had changing color and flavor, and less effective hits. With dmt salts, no susch issues.
