Hello everyone! First i want to say that i am writing this on a tablet so you WILL see mistakes 
.
As the title says it i am having trouble with the tincture tek.
Based on some rereading i have come up with several conclusions and i just want you, the more expirienced, to give me some tips on what to do next.
So... i mixed the ACRB (around 70g) with vinegar ( the vinegar i am using is 6% apple vinegar if that matters) and hot water.... stirred and then added 4 spoons of the lime that is on the picture( i hope i manage to upload photoes). The consistency, compared to ones ive seen on the net was too liquidy in my opinion that is why i added so much lime. Anyways i let the bark stay for up to 24 hrs like this with stirring every few hours. The mix was forming a darkened top when left like describedd in the guide, though it was a bit more like dark brown. As soon as you stir it a bit you see the grey colour pops out and the mix turns greyish. So after the 24 hrs i added xylene to the mix( around 150ml since some of it was absorbed by the basic mix?). The xylene stayed on top above the mush. I tried to stir aound the mush with chopsticks so all the bark comes in contact with the solvent. I left the solvent there for 20-25 mins.And then poured the top layer ( solvent) into a jar. I added the same vinegar to the solvent in the jar and agitated it periodically for 10 mins. I took the bottom layer (acetic acid) with the help of a glass syringe and put it in a separate container. I added hot water again to the solvent and gathered up most whats left. The 'dmt acetate' ( i hope) was then put on high temp to start boiling and when it reached around 30-50ml i lowered it down. As the tincture colour ( dark yellow ,a bit brown) was reached i sucked around 5-6ml. Those mls were then put on a spoon and further evaporated. I was watching carefully for dark smoke in case im burning the dmt. At first i was panicing because there was some dark smoke coming but later figured out that it was coming from the overburned bottom of the spoon. I have pic of the final product which i will try to upload. So finally... SWIM had a final product. He out 1/3 of the wax on the inside of a paper and filled it with weed. During the smoke SWIM felt the same feeling when he had smoked before and was sure there was some dmt in there. Breakthrough did not occur. Even though i smoked the whole J which was filled with about 1g of W. So this is the story cut short,
My questions are- Swim didnt reach what he was looking for because he did not smoke it right ad because there was not enough wax concentrated in 1 place and rather small pulls with more weed blew up the scheme?
After i did the first pull some xylene is let in the mix. Will it be safe to microwave it now so i reach for a bettter consistency and try again with another pull?. Swim still has some wax left so he will probably try to smoke it again in 2-3 days when he has the time but from a bong or a pipe ( sandwitched inbetween herbs) Since this is my 2nd fail of this tek, in a way i want to ditch it and try with naphta, but i keep thinking to myself that i am really close to it it is just i am doing some minor things wrong.
A bit info: swim has smoked in total 4 times of which first 2 were bought. 1 a major fail with smoking in a light bulb. 2 was the ultimate trip which consisted of me putting the powder inbetween the weed i rolled in several thick layers. The try was a total success. Ever since then i said to myself i would only smoke if swim made it. i tried the same thing a while ago but with shredded bark nad screwed up a bit the mixture though i still reached end product which was nothing more than making swim's head light. The end product he smoked yesterday felt a lot closer to what it should be.
IF this post in any way is not situated in the right place please do move it. I hope i do not sound like the typical guy that posts threads here and there because i have done a lot of reading on it and am a bit confused as to what ive done wrong.
Thank you in advance for the help ladies and gentlemen!
Attention: post might be a bit wrecklessly/chaoticly structured due to swim not haing much time.
The uploaded photoes are of the lime whih i want to question you if this is the right one.
The other 1 is with the already done tincture on the spoon ( good thing i made a pic of it, it was because it looked as if there was a formed face there)
Third one is the mix of bark,lime,vinegar,water and a bit of xylene left from the 1st pull that is why now it looks even more liquidy.
Hope this makes things more understandable for you guys.
Peace and Love
. As the title says it i am having trouble with the tincture tek.
Based on some rereading i have come up with several conclusions and i just want you, the more expirienced, to give me some tips on what to do next.
So... i mixed the ACRB (around 70g) with vinegar ( the vinegar i am using is 6% apple vinegar if that matters) and hot water.... stirred and then added 4 spoons of the lime that is on the picture( i hope i manage to upload photoes). The consistency, compared to ones ive seen on the net was too liquidy in my opinion that is why i added so much lime. Anyways i let the bark stay for up to 24 hrs like this with stirring every few hours. The mix was forming a darkened top when left like describedd in the guide, though it was a bit more like dark brown. As soon as you stir it a bit you see the grey colour pops out and the mix turns greyish. So after the 24 hrs i added xylene to the mix( around 150ml since some of it was absorbed by the basic mix?). The xylene stayed on top above the mush. I tried to stir aound the mush with chopsticks so all the bark comes in contact with the solvent. I left the solvent there for 20-25 mins.And then poured the top layer ( solvent) into a jar. I added the same vinegar to the solvent in the jar and agitated it periodically for 10 mins. I took the bottom layer (acetic acid) with the help of a glass syringe and put it in a separate container. I added hot water again to the solvent and gathered up most whats left. The 'dmt acetate' ( i hope) was then put on high temp to start boiling and when it reached around 30-50ml i lowered it down. As the tincture colour ( dark yellow ,a bit brown) was reached i sucked around 5-6ml. Those mls were then put on a spoon and further evaporated. I was watching carefully for dark smoke in case im burning the dmt. At first i was panicing because there was some dark smoke coming but later figured out that it was coming from the overburned bottom of the spoon
. I have pic of the final product which i will try to upload. So finally... SWIM had a final product. He out 1/3 of the wax on the inside of a paper and filled it with weed. During the smoke SWIM felt the same feeling when he had smoked before and was sure there was some dmt in there. Breakthrough did not occur. Even though i smoked the whole J which was filled with about 1g of W. So this is the story cut short,My questions are- Swim didnt reach what he was looking for because he did not smoke it right ad because there was not enough wax concentrated in 1 place and rather small pulls with more weed blew up the scheme?
After i did the first pull some xylene is let in the mix. Will it be safe to microwave it now so i reach for a bettter consistency and try again with another pull?. Swim still has some wax left so he will probably try to smoke it again in 2-3 days when he has the time but from a bong or a pipe ( sandwitched inbetween herbs) Since this is my 2nd fail of this tek, in a way i want to ditch it and try with naphta, but i keep thinking to myself that i am really close to it it is just i am doing some minor things wrong.
A bit info: swim has smoked in total 4 times of which first 2 were bought. 1 a major fail with smoking in a light bulb. 2 was the ultimate trip which consisted of me putting the powder inbetween the weed i rolled in several thick layers. The try was a total success. Ever since then i said to myself i would only smoke if swim made it. i tried the same thing a while ago but with shredded bark nad screwed up a bit the mixture though i still reached end product which was nothing more than making swim's head light. The end product he smoked yesterday felt a lot closer to what it should be.
IF this post in any way is not situated in the right place please do move it. I hope i do not sound like the typical guy that posts threads here and there because i have done a lot of reading on it and am a bit confused as to what ive done wrong.
Thank you in advance for the help ladies and gentlemen!
Attention: post might be a bit wrecklessly/chaoticly structured due to swim not haing much time.
The uploaded photoes are of the lime whih i want to question you if this is the right one.
The other 1 is with the already done tincture on the spoon ( good thing i made a pic of it, it was because it looked as if there was a formed face there
)Third one is the mix of bark,lime,vinegar,water and a bit of xylene left from the 1st pull that is why now it looks even more liquidy.
Hope this makes things more understandable for you guys.
Peace and Love
