nathanielle
Rising Star
Hi 
Since reading this incredible post in its entirety (and if you vape, I urge you to read it now!), I've been converted to the eliquid method. It won't be for everyone - but for me, it is the easiest, cleanest, stealthiest, most reliable method I have used. I used to smoke cigarettes (for almost fifteen years) and switched to vaping eventually, after my lungs told me I needed to change something. Prior to this I've tried the regular hash pipe (meh), foil (no bueno), insufflation (oh lord the pain), regular bong (getting there), bong with ice-water (even better), the machine (functional, definitely), tiny little glass jars with a straw through the cork stopper (not sure what I was thinking) just off the top of my head. I've never had the chance or the spare cash to try a GVG, which I know is widely loved, but what I love about this method is that you don't need fire. Why bring a fire when you just need a bit of heat?
Anyway
I've found a benefit of the eliquid method. On every extraction I go through, after scraping up the goodies there is always a part of the dish I can't get to with a razor and some product is lost, usually around the corners. Even rounded pyrex doesn't allow for a razor to bend into it's dips and curves, but seeing as what has just been extracted is going to be mixed into a vapable liquid, I've just gently squirted the hard to reach areas with a tiny amount of PG (3-5ml) to dissolve it, then when each crystal/goo area on the scraped pryrex is clear and the remaining product is in the PG, the dish can be tilted to allow a syringe to suck up the remaining PG back up into the final solution.
I was regretably quite drunk when I mixed up my first batch of e-DMT (not a compound, just a portmanteau of e-liquid and DMT), so the ratios from then are lost to me. ducdevil's suggested 1:6 ratio was the first since then that I read that seemed reasonable so I gave it a go. However, in practice (and bearing in mind my state of mind and fallability) it's too much for me. The 1:6 ratio (250mg per 1ml) mixed up 1.5g of spice with 9ml of VG into an opaque, viscous liquid and was added to a 10ml bottle. This batch is creamy tan (the last batch was clear and tomato red, so YMMV):
First trials on the 1:6 solution took me there in no time. One primer puff to make sure all was functioning as expected, then a long, slow inhale, letting go of the 'fire' (or 'GO' ) button about 3 seconds before I stopped inhaling (the coil is still hot when you take your finger off the button and DMT is still vapourising, so suck it all up!) was incredibly potent. I retried it again after about 45 minutes to an hour, and the experience that followed shook me to my bones. Scared? Oh yes. Frightened? To my core. But so powerful. But this intensity in a journey can't be for every single time - I like the fun and wonder just as much as the harrowing truth of birth and life, so for me, it needed to be diluted to allow me the option to explore further if I felt that was where I wanted to be.
30ml bottles of eliquid sometimes come in glass with little glass eyedroppers which can be re-used, so I washed out and set two of those to the side. I took the PG solute from the pyrex dish and squirted it into a 250ml graduated beaker (just for the breathing space). I added 3g of DMT to the beaker. It fell in like little clumps of wool. Hot and wet was needed, so I heated 20ml of VG in the microwave in a shot glass for about 3 seconds then touch it to determine heat.
WARNING: If anyone were to microwave VG or PG, please be aware that it heats up in next to no time and can be incredibly dangerous. A 10 second spin could mean a spurting lava fountain if you are not careful, you DO NOT want that so be careful. I usually count to three, open the microwave door and tentatively check the temp between thumb and forefinger.
The heated VG is added to the reclaimed PG solution and the 3g of DMT in the 250ml graduated beaker. When I did this the VG was hot enough to burn my skin. My bad, I underestimated the microwave. The temp of the glass isn't the same as the liquid it's holding, live and learn. It cools to an ambient temp quickly though, so when it is 'toasty warm bath' hot, add it to the mix and stir until all the clumps dissolve. And that's basically it. It should be about 50/50 PG/VG, but with the spice it's a little thicker, so should hold up well enough in a tank. Keeping the tank upside down stops leaking (assuming you've checked all the O rings and everything else are in place).
I also added the remainder of the super-potent first batch to this one in equal amounts, so rough figures are about 4.5g of DMT split between 2 30ml bottles. I am yet to try the pictured batch, as it is a combination of old and new, but I do have high hopes for it and I am trusting in my basic math, fingers crossed.
The DMT will form a film or gunk or skin or some separate later from the the VG/PG, but heat willl disperse it and bring it back to a homogeneous opaque liquid if needs be
I know this is missing loads of info so I'll update when I can - and if anything could be better, let me know how
Happy travels x
Since reading this incredible post in its entirety (and if you vape, I urge you to read it now!), I've been converted to the eliquid method. It won't be for everyone - but for me, it is the easiest, cleanest, stealthiest, most reliable method I have used. I used to smoke cigarettes (for almost fifteen years) and switched to vaping eventually, after my lungs told me I needed to change something. Prior to this I've tried the regular hash pipe (meh), foil (no bueno), insufflation (oh lord the pain), regular bong (getting there), bong with ice-water (even better), the machine (functional, definitely), tiny little glass jars with a straw through the cork stopper (not sure what I was thinking) just off the top of my head. I've never had the chance or the spare cash to try a GVG, which I know is widely loved, but what I love about this method is that you don't need fire. Why bring a fire when you just need a bit of heat?
Anyway
I've found a benefit of the eliquid method. On every extraction I go through, after scraping up the goodies there is always a part of the dish I can't get to with a razor and some product is lost, usually around the corners. Even rounded pyrex doesn't allow for a razor to bend into it's dips and curves, but seeing as what has just been extracted is going to be mixed into a vapable liquid, I've just gently squirted the hard to reach areas with a tiny amount of PG (3-5ml) to dissolve it, then when each crystal/goo area on the scraped pryrex is clear and the remaining product is in the PG, the dish can be tilted to allow a syringe to suck up the remaining PG back up into the final solution.
I was regretably quite drunk when I mixed up my first batch of e-DMT (not a compound, just a portmanteau of e-liquid and DMT), so the ratios from then are lost to me. ducdevil's suggested 1:6 ratio was the first since then that I read that seemed reasonable so I gave it a go. However, in practice (and bearing in mind my state of mind and fallability) it's too much for me. The 1:6 ratio (250mg per 1ml) mixed up 1.5g of spice with 9ml of VG into an opaque, viscous liquid and was added to a 10ml bottle. This batch is creamy tan (the last batch was clear and tomato red, so YMMV):

First trials on the 1:6 solution took me there in no time. One primer puff to make sure all was functioning as expected, then a long, slow inhale, letting go of the 'fire' (or 'GO' ) button about 3 seconds before I stopped inhaling (the coil is still hot when you take your finger off the button and DMT is still vapourising, so suck it all up!) was incredibly potent. I retried it again after about 45 minutes to an hour, and the experience that followed shook me to my bones. Scared? Oh yes. Frightened? To my core. But so powerful. But this intensity in a journey can't be for every single time - I like the fun and wonder just as much as the harrowing truth of birth and life, so for me, it needed to be diluted to allow me the option to explore further if I felt that was where I wanted to be.
30ml bottles of eliquid sometimes come in glass with little glass eyedroppers which can be re-used, so I washed out and set two of those to the side. I took the PG solute from the pyrex dish and squirted it into a 250ml graduated beaker (just for the breathing space). I added 3g of DMT to the beaker. It fell in like little clumps of wool. Hot and wet was needed, so I heated 20ml of VG in the microwave in a shot glass for about 3 seconds then touch it to determine heat.
WARNING: If anyone were to microwave VG or PG, please be aware that it heats up in next to no time and can be incredibly dangerous. A 10 second spin could mean a spurting lava fountain if you are not careful, you DO NOT want that so be careful. I usually count to three, open the microwave door and tentatively check the temp between thumb and forefinger.
The heated VG is added to the reclaimed PG solution and the 3g of DMT in the 250ml graduated beaker. When I did this the VG was hot enough to burn my skin. My bad, I underestimated the microwave. The temp of the glass isn't the same as the liquid it's holding, live and learn. It cools to an ambient temp quickly though, so when it is 'toasty warm bath' hot, add it to the mix and stir until all the clumps dissolve. And that's basically it. It should be about 50/50 PG/VG, but with the spice it's a little thicker, so should hold up well enough in a tank. Keeping the tank upside down stops leaking (assuming you've checked all the O rings and everything else are in place).

I also added the remainder of the super-potent first batch to this one in equal amounts, so rough figures are about 4.5g of DMT split between 2 30ml bottles. I am yet to try the pictured batch, as it is a combination of old and new, but I do have high hopes for it and I am trusting in my basic math, fingers crossed.
The DMT will form a film or gunk or skin or some separate later from the the VG/PG, but heat willl disperse it and bring it back to a homogeneous opaque liquid if needs be
I know this is missing loads of info so I'll update when I can - and if anything could be better, let me know how
Happy travels x