• Members of the previous forum can retrieve their temporary password here, (login and check your PM).

Vape cart with DMT and cannabichromene (CBC)

Migrated topic.

potato

Rising Star
Joined
Sep 23, 2017
Messages
41
Merits
47
CBC is a great additive for ultra potent DMT vape carts.

I've been doing some experimentation and have found that DMT homogenizes very well with CBC isolate. CBC is non-psychoactive and DMT and CBC mixed at a ratio of 3:1 yields a highly viscous liquid at room temperature. This mixture is well suited for disposable 510 thread vape cartridges with large oil intake holes for thick THC distillate.

I think this is interesting because I've found that DMT mixed with traditional 50/50-PG/VG ejuice is nearly solid when the DMT/ejuice ratio is 3:1. Liquid this thick performs poorly in disposable vape cartridges.

I put some 3:1 DMT/CBC mixture in a disposable vape cartridge with 3x2mm intake holes and a quartz coil. I find this cartridge to be spectacularly effective. You can control dosage by adjusting the battery's voltage. Low voltage gives less dense, more manageable hits and high voltage makes crazy dense vapor that will blast you off in one large hit if held in long enough.

If you seek a recipe for excellent DMT vape carts and are unsatisfied with carts containing PG/VG, try some CBC isolate.

update: after about 48 hours, the liquid has not crystallized and still flows, albeit very slowly. this is good because in my tests DMT and pg or vg at a ratio has high as 2.5:1 would have totally crystallized by now. and this is 3:1 DMT:CBC
 
This is absolutely genius. I make and sell Delta 8 carts so I actually had the materials on hand and made a cart last night, 750mg DMT and .25ml CBC. My calculations on the PG 1to1 cart has been around 9mg per puff so this should easily put me at 1.5 puff breakthroughs which is easier than drawing a cart 3 times, that 3rd pull is hard to take. I'm going to try it out tonight. I thought about it and it makes sense it stays liquid in the cart without crashing, CBC is technically a NPS. Thank you for sharing this.

The only drawback is my new "medical grade" ceramic carts have not come in yet so I'm using I can't remember the brand name but theyre the tall metal ones with 2 tiny holes but I have never had an issue with D8 in them and that stuff is like plastic even with CBC and 6% terpenes added, it's a lot more viscous than normal Delta 9.
 
Can you add terps to the CBC/DMT mixture to flavor the cart?

Most certainly lol. I haven't made my own DMT carts yet but i have consumed terpenes alongside DMT, both oral terpenes as well as vaped terpenes, terpenes are surprisingly very effective compounds especially when taken orally and have lots of medicinal benefits in the body, some of which is documented scientifically-speaking but ime personally i've definitely noticed active effects from terpenes and they can flavor the DMT not just taste-wise but flavors the effects and experiences in different ways depending on the terpenes and the ratios or what not, usually i use isolated terpenes though rather than Cannabis extracts or what not.
 
Gonna try this out this weekend. Do you have any tips on how to mix the DMT with the CBC without spilling it everywhere? Also, do you first melt the DMT in a container before mixing CBC and the DMT, or do you just add the DMT as is? I have very pure, powdery DMT-xtals, almost as white as snow, some are a bit yellow-tainted.


CBC is a great additive for ultra potent DMT vape carts.

I've been doing some experimentation and have found that DMT homogenizes very well with CBC isolate. CBC is non-psychoactive and DMT and CBC mixed at a ratio of 3:1 yields a highly viscous liquid at room temperature. This mixture is well suited for disposable 510 thread vape cartridges with large oil intake holes for thick THC distillate.

I think this is interesting because I've found that DMT mixed with traditional 50/50-PG/VG ejuice is nearly solid when the DMT/ejuice ratio is 3:1. Liquid this thick performs poorly in disposable vape cartridges.

I put some 3:1 DMT/CBC mixture in a disposable vape cartridge with 3x2mm intake holes and a quartz coil. I find this cartridge to be spectacularly effective. You can control dosage by adjusting the battery's voltage. Low voltage gives less dense, more manageable hits and high voltage makes crazy dense vapor that will blast you off in one large hit if held in long enough.

If you seek a recipe for excellent DMT vape carts and are unsatisfied with carts containing PG/VG, try some CBC isolate.

update: after about 48 hours, the liquid has not crystallized and still flows, albeit very slowly. this is good because in my tests DMT and pg or vg at a ratio has high as 2.5:1 would have totally crystallized by now. and this is 3:1 DMT:CBC
 
I just tried this with the ratio of 1:3 but the DMT is starting to crash to crystallize now after approximately 2-3 hours. I might need to try 1:2 ratio instead..
 
I just tried this with the ratio of 1:3 but the DMT is starting to crash to crystallize now after approximately 2-3 hours. I might need to try 1:2 ratio instead..
Are you sure the DMT was fully dissolved to start with? What mixing method did you use, and did you warm it up at all? What has the ambient temperature been since you made the mixture?

Of course, we can't guarantee that your cannabichromene isolate is completely identical to the one used by @potato. Differences in 'impurity' profile may affect the solubility of DMT. These may include other cannabinoids, and/or solvent residues, terpenes etc.
 
Are you sure the DMT was fully dissolved to start with? What mixing method did you use, and did you warm it up at all? What has the ambient temperature been since you made the mixture?

Of course, we can't guarantee that your cannabichromene isolate is completely identical to the one used by @potato. Differences in 'impurity' profile may affect the solubility of DMT. These may include other cannabinoids, and/or solvent residues, terpenes etc.
Yes the DMT was fully dissolved, I melted it in a hot bath and then added the CBC, stirred the mixture a couple of times and let it cool down.The ambient temperature is around 20 degrees Celsius.

I tried 1ml of CBC with 3000mg of DMT, it started to crash out after a few hours. I just warmed everything up again and added another 0.2ml of CBC into the mixture. Will let it Cool to room temperature over a few hours and see if that does the trick.

With 1.25ml of CBC and 3000mg of DMT my ratio should be 2.5:1 (DMT:CBC). Will give an update later



Update:

The DMT crashed out with the ratio of 2.5:1 as well, tried 2:1 and it crashed out after 4-5 hours too. Trying 1.5:1 now.

As you say it might be that the CBC is not as pure as it should be, even though the vendor I bought it from says it is 100% pure CBC (whenever anyone claims something is 100% pure it makes me doubtful). Will try CBC from another vendor at a later point.

Tried taking some short shallow puffs from the vape before it solidified and holy shit it is effective, woow! I have been trying to find an effective and easy way of vaping DMT for quite some time now, and I am thankful for this post, @potato!


Update 2: Ratio of 1.5:1 is on the verge of making the liquid a solid, I see small crystallizations after approximately 24 hours. But vaping works fine as the coil heats up the bottom part of the liquid. Also, if heat it cartridge up by holding it in my hand, the crystals disappear, So Il'be using this ratio for now until I run out (will take a while lol) and get me some CBC from another vendor at a later point.
 
Last edited:
Are you guys using cbc isolate or distillate? I have very potent solid crystals (synthetic) and last time I had this grade, I had a lot of troubles with using pg/vg, as my pens would either leak because of the low viscosity or recrystalize within minutes of taking a lighter to the cart depending on ratio. I saw a post a long time ago ago (this might have been the tread) of someone using cbc distillate as a mix.
 
Back
Top Bottom