doubt: methods. How smoking DMT?

[Deos]

Hi
Soon I get pure DMT, as I have get it to try to make sure that is DMT and no flour or anything. Well, I have not tried the DMT before, but from what I've read I know that I will realize the effects described as so brutal.

I've been reporting on methods and techniques for smoking DMT, but even so I still have many questions that I hope someone can help. The methods I've found are:

-Vaporizers: I dont know that kind of vaporizer appropriate or what temperature is well, I'm not familiar with vaporizers

-Technical DMT between two papers silver: silver paper of bottom with holes that allow vapor of DMT pass. How efficient is this technique?

-The technique of ash DMT ash: The flame should go straight to the ash? I know that the flame does not go directly to DMT, but. is not there a danger that the DMT combust by the high temperature? How efficient is it?

-Bulb: remove the top of bulb, introduce the DMT inside, put a bottle cap on top of the bulb and put duct tape to achieve proper bonding, the bottle cap must be crossed by a tube could be the cover of a pen. Is it efficient although in spite of this instrument have no other place within it that allow air to suck the smoke so fine? Is it possible to suck steam of DMT of effective way?

-Pipe glass type for methamphetamine, crack or heroin: A glass tube attached to a crystal ball that has a hole. My doubt: it is possible that the steam of DMT exhaust through the hole has the sphere? Or is there a technique so may prevent steam from escaping? How efficient is it?

DMT machine: A bottle with a hole in its base and with a sponge of metal in the neck of the bottle. My question is how do I put the DMT without fall into the bottle or out of the bottle while trying to smoke it? Is there a way to paste the dmt in the sponge? is toxic smoking sponge of metal? Direct flame is given to the tow or the neck of the bottle?

-At the end of a cigar: Let me see if I understand. supposed snuff is removed from the tip of the cigar, you enter the DMT and is returned snuff? How do you know at what time I will smoke DMT? How efficient is it?

By the time I got one of those glass pipes I mentioned with a hole in the crystal ball, the hole have a straw which is then attached to another straw that changes its direction 180 degrees with the idea that when smoking DMT vapor not escape so easily, annex the image to give me your comments on how effective it could be:

I would test the first time the minimum amount possible so I can feel its effects, but enough to be sure that it is DMT, as I say. do you think would be good with 15 milligrams?

What method do you recommend me more?
What would you advise me?

Excuse me my bad english
I also hope one day of these you can promote me
Greetings!

 

[Pandora]

Hi There Deos,

Welcome to the Nexus. I cannot stress enough how important it is to extract your own DMT. Lots of fear can come with DMT trips. Why not remove the fear of things like where it came from, how it was extracted, what was done to it when and by whom?

Please take some time to really take a good look around here. Not only are there wonderful subfora to see that are packed with information, including this https://sphotos-b.xx.fbcdn.net/hphotos-prn1/66548_10151123763456909_1477140398_n.jpg

but there are also useful stickeys on things like smoking techniques. Also the links in your upper right hand corner are very very important. Take a good look at them indepth please, including Attitude, wiki (extraction teks found here), FAQ and Health & Safety.

Again, welcome to the Nexus.

 

[olympus mon]

Welcome, Its great you have a good curiosity for dmt and different smoking methods. As Pandora pointed out to you there are loads of great information easily found within the Wiki as well as the different topics of the forum. Everything your wanting to know is all right here.

Check out the smoking section for starters. there is a sticky there that describes the different methods one can use to correctly intake dmt. Here is a link to them.

First steps in hyper space will tell you about dosing here in the forums but to be honest If I was you Id spend a good couple hours or even days In the FAQ area and the WIKI. Its got everything you need to educate yourself all about dmt.

Think about doing your own extraction. Why take any chances of unknown sources when you can make your own dmt right at home.

 

[The Observer]

Getting extremely tired of people not willing to take an hour or two, to read the vast amounts of quality posts that already exist

Almost daily, people post questions that have been beaten to death for a longgggggggg time.

Get a grip and do some of your own research..............

Posts are getting less meaningful as people post questions that have been answered for years, and which are easily available thru FAQ or Wiki.....

Also believe that many people, that are repeat and veteran nexites, that humor these folks by answering the same questions ongoingly, help to fuel this lazy approach that many take.

I always try my best to do my homework, and searches, prior to asking questions, and then only if they haven't been answered directly from my research.

IMO

 

[Jarl Von Hoother]

Getting extremely tired of people not willing to take an hour or two, to read the vast amounts of quality posts that already exist

Almost daily, people post questions that have been beaten to death for a longgggggggg time.

Get a grip and do some of your own research..............

Posts are getting less meaningful as people post questions that have been answered for years, and which are easily available thru FAQ or Wiki.....

I have to disagree with The Observer, because DMT Nexus presents it's self with humbled people willing w/out a shadow beyond the doubt ecourage and thoroughly help one another break through.

We have no need for giving the cold shoulder for ANYBODY looking to join our world.

Try not to take out your petty frustration on people looking to enlighten themselves Shhessssh!

 

[olympus mon]

Getting extremely tired of people not willing to take an hour or two, to read the vast amounts of quality posts that already exist

Almost daily, people post questions that have been beaten to death for a longgggggggg time.

Get a grip and do some of your own research..............

Posts are getting less meaningful as people post questions that have been answered for years, and which are easily available thru FAQ or Wiki.....

Also believe that many people, that are repeat and veteran nexites, that humor these folks by answering the same questions ongoingly, help to fuel this lazy approach that many take.

I always try my best to do my homework, and searches, prior to asking questions, and then only if they haven't been answered directly from my research.

IMO

Yes it is repetitive but all you can do is inform people that this information is already here waiting for them. No need to get upset or angry with new members while they learn how the nexus works and how to navigate around.

The forums have grown so much over the years its not always easy to find information in the archives. The search engine isn't the greatest in case you haven't noticed so I try to be patient with them since at times I cant even find what Im looking for.
You've been here for 6 months and are this frustrated while many of us have been here since the beginning directing newbies to the sources they need patiently. Take a breath mate, people are doing their best 90% of the time, the other 10% are informed they're being lazy.

 

[DMTripper]

I agree you should extract your own DMT. You don't want to be worrying about what you really smoked when blasting off to hyperspace.

But if you don't have a good vaporiser then I would go with the machine. Before I got my GVG I used a machine that served me well.

Well good luck with your journey's.

 

[Deos]

Getting extremely tired of people not willing to take an hour or two, to read the vast amounts of quality posts that already exist

Almost daily, people post questions that have been beaten to death for a longgggggggg time.

Get a grip and do some of your own research..............

Posts are getting less meaningful as people post questions that have been answered for years, and which are easily available thru FAQ or Wiki.....

Also believe that many people, that are repeat and veteran nexites, that humor these folks by answering the same questions ongoingly, help to fuel this lazy approach that many take.

I always try my best to do my homework, and searches, prior to asking questions, and then only if they haven't been answered directly from my research.

IMO

Hi
I researched before asking in the forum, if it were not so I would not know many methods like those I mentioned.
It would have been different if only I asked: which method is better?
Also, English is not so easy for me, its not easy to read all the previous threads

 

[Deos]

Before I got my GVG I used a machine that served me well.

What meaning is "GVG"?

 

[MomentOfTruth]

Glass Vapor Genie. Google it! Best pipe ever for vaporizing freebase dmt. By far the champion of vaporization tools for DMT. It works great with herbs as well but i think i will personally buy a second GVG for my normal herb smoking as i don't like cleaning my GVG every time i smoke DMT out of it and i don't like smoking herb through my GVG when it has residual DMT in it.

Point being, GVG is the best as far as DMT vaporization.

In regards to all of the other methods you mentioned... the most effective, most consistent, and easiest of those methods is going to be a "Machine" type pipe. It is virtually impossible to mess it up! You put your dmt in the copper mess, hold a flame close enough to it to melt it into the screen a little bit, tip the copper mesh end down and put your mouth on the opposite end and inhale. You simply bring the flame close to the mesh screen and it begins vaporizing the dmt in the mesh. The mesh works as a heat sink and distributes the heat evenly. Since you are aiming it down, the dmt will not melt up into the chamber and will stay in the mesh area close to the flame. This makes it easy to vaporize virtually all of the dmt without wasting anything.

Your next best bet is to make some changa or infused herbs.(see the stickies at the top of the CHANGA forum) Simply dissolve your dmt in a small amount of acetone/IPA, add herbs, let evaporate. Viola! DMT infused herbs! You can smoke changa in a number of pipe devices. The focus when using combustion for changa is to only let the flame touch the changa long enough to "cherry" it. Then let the cherry do the work. In my opinion it is best to use a 1:1 ratio of herb to DMT. This makes sure that you don't have to smoke a ton of herb material to reach threshold effects.

These are just my thoughts/opinions.

I would highly avoid the light bulb or methpipe methods. Way too harsh and difficult to control the heat so the dmt vaporizes evenly. You will likely waste a decent amount of product before you find the sweet spot.

This is not the case for the first two options i presented. Anything that melts through the screens in the GVG can be pulled back out and recrystallized with a small amount of solvent. And i've never had dmt melt through into the vapor chamber of my "machine" type pipes.

You also tend to waste/burn a decent amount of dmt trying to perfect a method of sandwiching it between herbs, or on top of ash. This takes a lot of practice and i don't recommend it when there are obviously much better options. Don't get me wrong, it can be done, but not nearly as effective. A machine costs so little to create that smoking dmt with any other method is just silly.

 

[hug46]

deos hola, soy nuevo en DMT también, he intentado muchas formas de fumar DMT y he encontrado la mejor manera es vg-vapor pulmones genie.My son a veces débiles, pero cuando fumo con el VG es muy fácil en mi chest.I fumar 20 mg de un tirón y estoy en el cielo! No he probado el cristal de vapor genio, pero la gente en este foro amar it.Also usted es de México? ¿Dónde se encuentra también mimosa? extraer usted mismo que es mejor para su mind.You puede encontrar la VG en eBay. Por favor, disculpe mi español ya que he utilizado el traductor de google!
vg, vg, vg, vg, vg, :thumb_up: :thumb_up: :thumb_up: :thumb_up: :thumb_up: :thumb_up: :thumb_up:

 

[Solar Jetman]

Also find out how much you will need for a decent trip as a lack of knowledge is as wise as running with scissors.

FYI: 30 - 50mg is enough

PRO TIP: Do your own extractions to be on the safe side.

 

[CharlesBronson]

I personally favor a nice glass waterpipe with a pile of smokeless cannabis resin at the bottom as a bed for the D. Never let the lighter touch the spice, keep it at melting distance until it stops smoking and then rip it a little harder to get all the goodies melted deep in the ash and hold it in as long as possible.

 

[The Observer]

Where you come up with your statistics, ie. "people are doing their best 90% of the time".........is beyond me............

If you look around, I truly believe that your estimation of what percentage people are doing their best, is nothing but BS..............

Most people are lazy, and want to avoid having to actually do their own due diligence..................

IMO

 

[hug46]

Most people are lazy, and want to avoid having to actually do their own due diligence..................

IMO

having said that the OP is from mexico where i believe the mother toungue is spanish. Reading through a wealth of posts in a language that you are not fluent in can be very confusing. Sometimes it was confusing to me and i am English, but i had the luxury of PMing a friend who is also a member in order to ask questions that may have cluttered up the forum.
Some people are lazy and i think i may count myself as one of them.......i blame my dad.Hes a lazy git too.....genetics:lol: