easy diy ejuice for vapers.

[1ce]

Hello nexus, I just succeeded in making a simple but delicious effective cannabis ejuice. I'll write out the steps and include optional steps with possible diy work arounds.

(optional) I started with my leaf material, I sonicated it in some solvent for 2 min and filtered off the larger particles.

I evaped solvent off, and decided that I'd prepare 30ml ejuice, about the size a standard bottle in most vape shops.I added 1% blueberry flavoring, and added 15ml propylene glycol.

(the flavoring came in pg, actually had to add about 14.8ml pg). I took the 15ml propylene glycol and centrifuged it to removr any fine particles, but this as well is optional and you can just filter most of them out.

I added 15ml vegetable glycerin to complete the 30ml bottle. Next I put it into a 50ml beaker and stirred it on a mag platr with some gentle heating. An optional step would be to put it in the bottle and shake it while heating with warm water.


my end product is a light honey colored ejuice that vapes smoothely with a bit of a kick to it Very nice vapor production, taste like blueberrh cannabis with no detectable 'pot' odor.

 

[sbc1]

Nice post 1ce, what solvent did you use, I've not got the type of equipment you've got but still wouldn't mind trying to make some cannabis ejuice someday, could you give me any info on the equipment you used, which sonicator ect. Thanks

 

[Spaced Out 2]

Do you know how much cannabis extract was used in your mix?

 

[1ce]

Do you know how much cannabis extract was used in your mix?

I extracted from ~.75g cannabis.

for the solvent I used chloroform, but I reckon iso or methanol or whatever you have on hanf would work. I used an ultrasonic cleaner for the extraction, <100$ on amazon. 2l size. a centrifuge, 25ml capacity, and a hotplate stirrer for mixing the juice.

I mainly used the centrifuge to filter out finer particles of plant matter since I did a lazy filter. all of this can be substituted ofc. I'd evap the solvent in the same dish you plan on adding pg in/

 

[sbc1]

Cheers 1ce, how much solvent did you use to cannabis, ultrasonic cleaner the bath type can you recommend one, sorry for all the questions, do you think it would be possible to do the same with mhrb. Thanks

 

[1ce]

doing another extraction now, 2g cannabis, I'll take pics. I'll use isopropanol for the extraction as many seem to use it.

 

[Spaced Out 2]

Do you know how much cannabis extract was used in your mix?

I extracted from ~.75g cannabis.

for the solvent I used chloroform, but I reckon iso or methanol or whatever you have on hanf would work. I used an ultrasonic cleaner for the extraction, <100$ on amazon. 2l size. a centrifuge, 25ml capacity, and a hotplate stirrer for mixing the juice.

I mainly used the centrifuge to filter out finer particles of plant matter since I did a lazy filter. all of this can be substituted ofc. I'd evap the solvent in the same dish you plan on adding pg in/

Thank you :thumb_up:

 

[sbc1]

doing another extraction now, 2g cannabis, I'll take pics. I'll use isopropanol for the extraction as many seem to use it.

Cheers 1ce, the more info the better thanks

 

[1ce]

it's pretty late and I'm tired now. I'll post a teaser of the final products until I can upload the rest tomorrow. new super concentrate is on the right.

https://imgur.com/BDu5hKq

 

[sbc1]

Looking forward to it 1ce

 

[1ce]

alright, image linking will not work using bbcode and as soon as I upload an image it keeps whiping this post, so I'm going to have to edit for each of them. bear with with me >.<

okay, first pic is the iso after being sonicated for 10 minuted. Probably excessive, as what was very dark green dense nuggets came out as a fine white powder. I quickly gravitt filtered this off, got some particulate, and it's rather rich in chlorophyll, but it will do.

second pic everything has just about evaporated off, it took quite a bit of agitation to clear out alot of the left over iso but eventually I got it.

3rd pic was after centrifuging at 4k rpm for 10 min. removed a ton pf particles. Important to clear these up as much as possible, could burn on your coil and taste terrible.

next pic I added propylene glycol. I'm doing this with a tank, verticle coil @36 watt. 50/50pg/vg seems to be the gest for me as far as taste/vapor is concerned. I'm making 30ml so I have just less than 15ml here. I heated this up and stirred it on a hotplate for a while. I need to point out that I mafe an uploading error, I actually did this before centeifuging.

afterwards I added flavoring, pg base. I used 2a%, but I think it could easilly take on 5% as much of it will be sitting and steeping for a while.

lastly, I added 15ml vg (vegetable glycerin) to bring it to 30ml. I stirred this on a hotplace for a while, and poured it off into a bottle.

first bottle was done with ~.75g amd l bottle on the right with 2g.

my ladyfriend thinks 4g vaped like this would last her 2.5-3mo. She used to smoke this much weekly. She reported the flavor to be smooth, and the onset to be gradual and natural feeling. She also mentioned that she never plans to consume mj any other way now, so I think it turned out well.:thumb_up:

I don't partake so I can only offwr her subjective views

 

[Spaced Out 2]

Nice :thumb_up:

How quickly will that darker batch clog up the cotton do you think?

 

[1ce]

Nice :thumb_up:

How quickly will that darker batch clog up the cotton do you think?

It's hard to say, from what I can see it's just chlorophyl and the cotton will last quite a while like this. I've got 400ft 24ga kanthal a1 wire though, I can make a dual wrapped .2ohms coil with about 8" wire. Japanase unbleached cotton wicks are also dirt cheap, and if you're careful you can rewick the coil without needing to replace it. I can't say for sure until we rebuild the coil but I think we'll get quite a bit of use out of it.

 

[sbc1]

Cheers 1ce, did you centifuge the extract or when it was mixed with the ejuice, also is there anyway to get rid of the cholophyll or make it more golden like your last batch. Thanks

 

[1ce]

Cheers 1ce, did you centifuge the extract or when it was mixed with the ejuice, also is there anyway to get rid of the cholophyll or make it more golden like your last batch. Thanks

filtration with a 40 micron filter, and freezing it wilk probably do the trick. dry hexane should also pull less chlorophyl. I used chloroform for the first extract.

I centrifuged after solvent evapped off, and product was dissolved in 15ml propylene glycol. Convenient since ,y tube capacity is 15ml and I can just fill 2 ballast tubes with pg and dump them back into the bottle when I'm finished.

 

[sbc1]

Cheers 1ce great post, how's your new batch considering you only used 2g

 

[1ce]

Cheers 1ce great post, how's your new batch considering you only used 2g

she reports it being very smooth, tastes great, no odor. She says onset is gradual and not abrupt. She says it's very potent and 1 bottle will last her a few weeks. She definitely has adopted it as her prefered method of 'smoking' cannabis from here on out. You could vape this stuff in a police station and no one would know.

vaporizer is a 2-50W eleaf istick with a sigelie x-tank. about 60$ for the two.

 

[sbc1]

Cheers 1ce thanks for the post, any idea if ultrasonic cleaner would work in extracting dmt

 

[Spaced Out 2]

Nice :thumb_up:

How quickly will that darker batch clog up the cotton do you think?

It's hard to say, from what I can see it's just chlorophyl and the cotton will last quite a while like this. I've got 400ft 24ga kanthal a1 wire though, I can make a dual wrapped .2ohms coil with about 8" wire. Japanase unbleached cotton wicks are also dirt cheap, and if you're careful you can rewick the coil without needing to replace it. I can't say for sure until we rebuild the coil but I think we'll get quite a bit of use out of it.

Thanks, I'll give it a try, got plenty of supplies gonna put them to use.

 

[1ce]

Cheers 1ce thanks for the post, any idea if ultrasonic cleaner would work in extracting dmt

I reckon it would perform remarkably better than traditional acid boils.I have plans on making a dmt ejuice (perhaps with harmala extract) and plan on sonicating it in citric acid, ph ~3. The unit I have can heat the liquid up to 80C.

I will be extracting from phalaris :3