Egzoset
Vaporist of Borg
Salutations,
To the attention of those who need to know, Egzoset refers to some missile that got named after a flying fish (with differing orthographs); i created this pro-cannabic profile near the last quarter of 2010 because of renewed hope following my discovery of vaporizers: as a former hashish smoker i had been abstaining since mid-2007 and only intended to offer an e-Cig as gift instead, hence the surprize. This joyful moment inspired a rocket riding the clouds through blue skies: « to boldly go where no man has gone before »... Then "The Borg" arrived within just a few "home-cultivator" sessions, initially meant to promote relaxation & serenity!
:lol:
My hobbyist focus gradually switched to consumption methods while allergy-related symptoms emerged, in response to over-exposure due to intense tweaking of semi-DiY "Prototyping Platforms" which required many more years of serious involvement before my fantasy-driven "LAVA" ideas would culminate into a most elementary criteria: just to seek "The Shortest Path of Lesser Transformation", to benefit from an exceptionally affordable near-perfect form of filtration if we consider that Mother Nature readily provides suitable packaging for its noble substances by collecting them on a molecular basis, e.g. at the site of genesis within trichome glands themselves.
So... "Micro-Bursting" refers to a lot more than "Micro-Dosing" alone: this alternative consumption method actually discriminates targets by virtue of mass/size in relative absence of thermalization: e.g. tiny features of contact-surfaces go 1st (leaving less noble stuff behind, quite hopefully)... And that's not all! Clean-burning butane paved the way to "Inlet Water" as a "Potentialization" agent applied to "Release/Transport"; apparently "Pulse Heating" significantly limits secondary/tertiary reactions, while it benefits from a potentializing boost. Etc., etc.
...
Quite obviously there still ain't too much love on most discussion boards for VaporGenie's vaporist pipes, though i'm hoping this may help to change that. So lets start with a quick diaporama showing past DiY challenge(s) published by Egzoset:
Google Images: Egzoset VaporGenie LAVA "Bi-Energy" "Hybrid Core" "Micro-Dosing" TinyPic
Please feel free to try search variants and keep in mind it was intended as an invitation to DUPLICATE & PEER REVIEW, which implies it always got to stick to simple/affordable basics! Mainly substractive work (like cutting or drilling)...
:thumb_up:
It turns out Egzoset was created in days when electromagnetic Induction Heat technology got spontaneously mocked while a long industrial evolution spreading over decades remained essentially ignored, including Curie alloys somehow... Back then the patented invention (US 7434584/9445629) of Dan Steinberg already depended on "Space Age" novel material, since nearly the Y2K bug era nonetheless (!):
[ http://oi67.tinypic.com/1zdprn6.jpg ]
That's Silicon Carbide Foam with a most specific tetrakaidecahedron shape, commercialized as "Duocel":
[ http://oi68.tinypic.com/2ptw2mq.jpg ]
Which confirms part of it truly *IS* rocket science all right!!
Initially i didn't suspect i'd feel so deceived by my HerbalAire v2.1 table unit, nor that i'd experience discomfort 6 months later... That's one fairly good reason why i eventually wanted to try VG's Classic pipe, after a couple years (only to give it away as gift the next week following my purchase, because i just lacked sufficient operator skills): though it offered Inlet Water in addition to significantly diverging from the dominant "Ovenizer" model (e.g. i got an irresistible/appealing intuition to revisit i guess)!
So... Egzoset's selection of VaporGenie's Classic directly resulted from such design considerations and hence i gave it a 2nd chance in mid-March 2013, the year after, determined to implement a long series of modding/customization experiments which happened to cost me well over 2 thousand Canuck dollars + more time/effort investment than what could be expected from any "newbie" vaporist around. Including this fresh/expensive update demonstrating a failed (though extremely promising) attempt:
[ http://oi64.tinypic.com/2nm0lu8.jpg ]
[ http://oi66.tinypic.com/vr3ioo.jpg ]
Too bad internal Handle-Path containment was lost at the handle/bowl interface!...
By the way please take note of the subtle nuances between these categories:
...
Here are recent publications showing half the potential (as "Plan-B") of an Hybrid Core where SiC foam is juxtaposed to a 17-Holes Metal Disc in order to include IH-driving as a future option (provided it's made of glass for the most part):
[ http://oi65.tinypic.com/316lw6g.jpg ]
[ http://oi65.tinypic.com/fnrztk.jpg ]
[ http://oi63.tinypic.com/24g2bmh.jpg ]
Experience demonstrated year after year that words were simply futile in absence of previous 1st-person perspective, yet if there has to be some explanations then lets quickly mention the PinHole and Hybrid Core features implemented using Metal "Tops" to allow convenient conversion to clean-burning blue (torch) flames and beyond; for example a real opportunity to evaluate Moist Impulse Mode, Packetized Micro-Dosing ranging from Mithridatism or Comatose-like Party toking (whichever one may wish, just swap "tops" around)...
In any case never forget VG pipe owners implicitly agree to void its warranty by engaging into similar semi-DiY transformations, hence please don't bother Dan Steinberg with it (i already have and plenty of times...)!
Overall what i'm proposing today is to acquire background using VG's pipe as a "Prototyping Platform" leading to even more advanced considerations where a stored Heat Charge is adjusted to match its WorkLoad (Cannabis Trichome Glands, DMT), etc...
And just in case one may feel quite ready to adopt electromagnetic Induction Heat please consider this other alternative that can be made all-glass using a tiny bit of creative imagination:
[ http://oi63.tinypic.com/14y4uma.jpg ]
IMHO it even paves the way to a rational Energy Budget as required by "portable" applications. YMMV!
...
Good day, have fun!! 8)
To the attention of those who need to know, Egzoset refers to some missile that got named after a flying fish (with differing orthographs); i created this pro-cannabic profile near the last quarter of 2010 because of renewed hope following my discovery of vaporizers: as a former hashish smoker i had been abstaining since mid-2007 and only intended to offer an e-Cig as gift instead, hence the surprize. This joyful moment inspired a rocket riding the clouds through blue skies: « to boldly go where no man has gone before »... Then "The Borg" arrived within just a few "home-cultivator" sessions, initially meant to promote relaxation & serenity!
:lol:
My hobbyist focus gradually switched to consumption methods while allergy-related symptoms emerged, in response to over-exposure due to intense tweaking of semi-DiY "Prototyping Platforms" which required many more years of serious involvement before my fantasy-driven "LAVA" ideas would culminate into a most elementary criteria: just to seek "The Shortest Path of Lesser Transformation", to benefit from an exceptionally affordable near-perfect form of filtration if we consider that Mother Nature readily provides suitable packaging for its noble substances by collecting them on a molecular basis, e.g. at the site of genesis within trichome glands themselves.
So... "Micro-Bursting" refers to a lot more than "Micro-Dosing" alone: this alternative consumption method actually discriminates targets by virtue of mass/size in relative absence of thermalization: e.g. tiny features of contact-surfaces go 1st (leaving less noble stuff behind, quite hopefully)... And that's not all! Clean-burning butane paved the way to "Inlet Water" as a "Potentialization" agent applied to "Release/Transport"; apparently "Pulse Heating" significantly limits secondary/tertiary reactions, while it benefits from a potentializing boost. Etc., etc.
...
Quite obviously there still ain't too much love on most discussion boards for VaporGenie's vaporist pipes, though i'm hoping this may help to change that. So lets start with a quick diaporama showing past DiY challenge(s) published by Egzoset:
Google Images: Egzoset VaporGenie LAVA "Bi-Energy" "Hybrid Core" "Micro-Dosing" TinyPic
Please feel free to try search variants and keep in mind it was intended as an invitation to DUPLICATE & PEER REVIEW, which implies it always got to stick to simple/affordable basics! Mainly substractive work (like cutting or drilling)...
:thumb_up:
It turns out Egzoset was created in days when electromagnetic Induction Heat technology got spontaneously mocked while a long industrial evolution spreading over decades remained essentially ignored, including Curie alloys somehow... Back then the patented invention (US 7434584/9445629) of Dan Steinberg already depended on "Space Age" novel material, since nearly the Y2K bug era nonetheless (!):
[ http://oi67.tinypic.com/1zdprn6.jpg ]
That's Silicon Carbide Foam with a most specific tetrakaidecahedron shape, commercialized as "Duocel":
[ http://oi68.tinypic.com/2ptw2mq.jpg ]
Which confirms part of it truly *IS* rocket science all right!!
Initially i didn't suspect i'd feel so deceived by my HerbalAire v2.1 table unit, nor that i'd experience discomfort 6 months later... That's one fairly good reason why i eventually wanted to try VG's Classic pipe, after a couple years (only to give it away as gift the next week following my purchase, because i just lacked sufficient operator skills): though it offered Inlet Water in addition to significantly diverging from the dominant "Ovenizer" model (e.g. i got an irresistible/appealing intuition to revisit i guess)!
So... Egzoset's selection of VaporGenie's Classic directly resulted from such design considerations and hence i gave it a 2nd chance in mid-March 2013, the year after, determined to implement a long series of modding/customization experiments which happened to cost me well over 2 thousand Canuck dollars + more time/effort investment than what could be expected from any "newbie" vaporist around. Including this fresh/expensive update demonstrating a failed (though extremely promising) attempt:
[ http://oi64.tinypic.com/2nm0lu8.jpg ]
[ http://oi66.tinypic.com/vr3ioo.jpg ]
Too bad internal Handle-Path containment was lost at the handle/bowl interface!...
By the way please take note of the subtle nuances between these categories:
- DiY involves being in charge from A to Z
Modding involves some DiY spending in order to implement novel/genuine features unavailable otherwise
Hacking is a way to avoid paying for existing premium features of commercially-available products
Cloning is a way to avoid paying for an existing commercially-available product
...
Here are recent publications showing half the potential (as "Plan-B") of an Hybrid Core where SiC foam is juxtaposed to a 17-Holes Metal Disc in order to include IH-driving as a future option (provided it's made of glass for the most part):
[ http://oi65.tinypic.com/316lw6g.jpg ]
[ http://oi65.tinypic.com/fnrztk.jpg ]
[ http://oi63.tinypic.com/24g2bmh.jpg ]
Experience demonstrated year after year that words were simply futile in absence of previous 1st-person perspective, yet if there has to be some explanations then lets quickly mention the PinHole and Hybrid Core features implemented using Metal "Tops" to allow convenient conversion to clean-burning blue (torch) flames and beyond; for example a real opportunity to evaluate Moist Impulse Mode, Packetized Micro-Dosing ranging from Mithridatism or Comatose-like Party toking (whichever one may wish, just swap "tops" around)...
In any case never forget VG pipe owners implicitly agree to void its warranty by engaging into similar semi-DiY transformations, hence please don't bother Dan Steinberg with it (i already have and plenty of times...)!
Overall what i'm proposing today is to acquire background using VG's pipe as a "Prototyping Platform" leading to even more advanced considerations where a stored Heat Charge is adjusted to match its WorkLoad (Cannabis Trichome Glands, DMT), etc...
And just in case one may feel quite ready to adopt electromagnetic Induction Heat please consider this other alternative that can be made all-glass using a tiny bit of creative imagination:
[ http://oi63.tinypic.com/14y4uma.jpg ]
IMHO it even paves the way to a rational Energy Budget as required by "portable" applications. YMMV!
...
Good day, have fun!! 8)