• Members of the previous forum can retrieve their temporary password here, (login and check your PM).

Research Proposed Salvia recognita & glutinosa breeding programme

Research done by (or for) the DMT-Nexus community

RitualOpossum

Established member
Joined
Jul 14, 2026
Messages
193
Merits
2,572
@Grasshoppers @neurobloom @stuartroelke we have seen success with breeding Phalaris why not look into Salvia recognita & glutinosa.

I want to participate in breeding Salvia recognita & glutinosa for higher potency strains but dont know where to start. I can grow it & harvest material & ship it to someone else to analyze it but I wonder how fast it would degrade. I know next to nothing about breeding and wanted to ask the three of you if this is something we can organize. IDK if Grasshoppers & neurobloom are willing to help i but I thought they would have insight and experience.

I think recognita and glutinosa have incredible potential and if bred in a similar manner to Research - The nexian phalaris breeding programme we would end up with potent strains that beat divinorum. If we could boost the potency of these plants it would give people the ability to grow an active Salvia in drought/cold - a huge gamechanger

What does everyone think about this?
 
Last edited:
I would love to contribute with Salvia glutinosa crosses, but I’ve been running into two issues:

1. My Salvia glutinosa seeds are from a reputable machine elf, though they refuse to germinate. Ran into the same issue with Salvia splendens. I’d appreciate tips.

2. My Salvia divinorum plants have only ever bloomed once indoors during the winter—I was not able to successfully pollinate them. They were in a grow tent, and heat / humidity have remained mostly constant over several years of growing these plants. Someone told me that a shorter duration of light could trigger it (can’t remember if I was running 10 or 12 hours). Does anyone have information about tricking salvia into flowering? Guides on pollinating?

Hopefully the S. glutinosa seeds that I planted two weeks ago end up sprouting.
 
Hey @Trypto You grow glutinosa, correct? Im getting started for my first year next spring and I know the seeds are tricky. Any tips buddy?

glutinosa seeds are small/hard to knick. I imagine cold stratification or perhaps hot water treatment could improve germination rate

Jellito is where I get seeds for recognita/glutinosa. They offer 3 different types of glutinosa seed ("Gold Seed", organic, & regular) would be interesting to see if the organic or gold seed are potential to start breeding strains

https://www.jelitto.com/Seed/ one can just use the search on this page
 
This is a great idea and certainly a fun project.

I think the first step would be to develop a reliable screening procedure. TLC should work well as a relatively simple and inexpensive starting point. For the extraction and chromatographic separation of diterpenoids, different solvent systems, such as petroleum ether/ethyl acetate mixtures, could be evaluated initially. For visualization, I would test both UV detection (using suitable UV-indicator plates) and different spray reagents to determine which combination gives the best sensitivity and selectivity.

Once a robust screening method has been established, I would try to acquire as diverse a germplasm collection as possible. You could then screen the material for the desired phenotype or chemical profile and use the most promising accessions as parents for hybridization.

With a good screening system and sufficiently diverse starting material, I am convinced that this approach could lead to rapid progress.
 
I think the first step would be to develop a reliable screening procedure. TLC should work well as a relatively simple and inexpensive starting point. For the extraction and chromatographic separation of diterpenoids, different solvent systems, such as petroleum ether/ethyl acetate mixtures, could be evaluated initially. For visualization, I would test both UV detection (using suitable UV-indicator plates) and different spray reagents to determine which combination gives the best sensitivity and selectivity.
Quick note: I won't be able to do any of this—that technology is not accessible to me. Additionally, multiple testing companies have told me that they don't have a reference for salvinorin A / salvia. Anecdotal experience remains my only route for testing the potency of homegrown materials.

Everyone here should check out this interesting article, as I'd like to start a new thread about it soon. The gist is that 1-Naphthaleneacetic acid (NAA) could boost salvinorin A and salvinorin B concentrations in Coleus scutellarioides by >200%. I've already started adding NAA to the water supply of a select few Salvia divinorum plants. If a similar boost is possible, then it would be obvious in both anecdotal tests and extractions. Furthermore, this could potentially boost potency of S. glutinosa and S. recognita.
 
Last edited:
Circling back, as my mother plant bloomed for the second time ever! Not sure what triggered it. The fall/winter grow tent setup is identical to what it was last year (12 hours of full-spectrum light), though the buds—and some of the leaves—have a reddish hue that I haven't seen before. Both could be a response to my tests with NAA.

Planted a second round of Salvia glutinosa seeds at the end of September, but none have sprouted yet.
 
Hey I was planning on growing Salvia glutinosa anyway. I loved the smell and the fact it can grow in our shaded forest edges on the farm. Only later found out they contain salvinorin. Would be an awesome project to contribute to.

I have good growing logistics available here. Large amounts of compost, near endless p9 pots, access to a large greenhouse and plenty of space to grow in native habitat. I also use my countries nature observation platform to track down populations of plants I find interesting as a hobby. So I would have little trouble finding diverse genetics.

The screening side I might need some help with. I have basic understanding of how TLC works in principle. But I have no experience using or testing different solvents, uv detection etc.

I am thinking i would start with screening Salvia divinorum as a baseline and compare S. glutinosa samples with that?
 
I might just join you cats if I can find s. glutinosa in my area. I've already had luck in sussing out the active coleus in my garden... I might try my hand at this one as well.
 
So i found this paper where they use a tlc screening method for salvinorin a. This method could be used or adapted to make a screening method for salvinorin a. I don't know how quantitative the results will be though.

I am thinking I would have to use Salvia divinorum to make a relatively pure salvinorin a powder. There are plenty of teks out there for that so that should be no problem as soon as I have enough leaves for a meaningful extraction.

I would then use this to make a series of reference concentrations to test on tlc. Subsequent S. glutinosa samples would be compared to this reference series to estimate concentration of salvinorin a. Hoping there are no overlapping diterpenes or other substances in S. glutinosa.

How quantitative is tlc though? Is it just as simple as darker spot = more salvinorin?
Again I am a bit over my head here with this but super interested. Any thoughts from the experts?

Also they use sulphuric acid in their tlc method Which is dangerous to use at home I would think. I have no access to a fume hood etc.
 
TLC is not well suited for absolute quantification.

Fortunately, absolute quantification is not required for selective breeding. Relative quantification is sufficient to identify the most potent plants. A larger spot generally indicates a higher concentration of the target compound and, therefore, a more potent plant.

The paper using ethyl acetate/hexanes as the mobile phase is interesting. It seems that products available at hardware stores might also work.

TLC plates are widely available, and in my experience, even inexpensive plates from AliExpress work just fine.

A plant-derived standard would be the best starting point.

I hope you can get access to the necessary equipment. It would be a really cool project!
 
TLC is not well suited for absolute quantification.

Fortunately, absolute quantification is not required for selective breeding. Relative quantification is sufficient to identify the most potent plants. A larger spot generally indicates a higher concentration of the target compound and, therefore, a more potent plant.

The paper using ethyl acetate/hexanes as the mobile phase is interesting. It seems that products available at hardware stores might also work.

TLC plates are widely available, and in my experience, even inexpensive plates from AliExpress work just fine.

A plant-derived standard would be the best starting point.

I hope you can get access to the necessary equipment. It would be a really cool project!
I'm sorry, what do you mean by 'plant derived standard'?

I will start doing research about what this all would entail and if it would be within my budget etc.

If I go through with this, would you be willing to occasionally answer some questions about the TLC process if I get stuck? Don't want to take too much of your time away from your Phalaris project haha. But there is significant overlap of course.

I'll start by thoroughly reading the whole Phalaris thread to get some more inspiration on the TLC process. Once I really decide to start I might open a seperate thread on salvinorin a screening.
 
TLC-test some Salvia divinorum samples and a purified Salvia divinorum extract. A colorimetric reagent could also be used for verification.

Once the Rf value is established, you can use standard silica gel F254 plates and a UV LED lamp to quickly and easily screen plant samples for salvinorin.

For the solvent system, I would start with inexpensive materials from a hardware store. These are often perfectly adequate.

I’m happy to answer questions and assist in developing a suitable testing method.

If you don’t have any laboratory equipment, you should budget around $200. That should be enough to cover the plates, a precision scale, solvents, pipettes, vials, a UV lamp, and everything else you need.
 
Dug around my Salvia glutinosa pot—found exactly one seed that was just starting to sprout. Some seemed rotten (hollow when pressed), and I nicked the sides of a few plump ones to see if that might help get things going. They should probably be scarified and soaked prior to planting.

Flowers are closer to blooming on my mother plant. How do I pollinate them?
 
Starting to flower. Did anyone find information on pollinating them? I just stuck a paintbrush in and swiveled it around while pointing the flower vertically. That’s how I typically handle Datura spp. (let gravity do the work).
 

Attachments

  • IMG_9294.jpeg
    IMG_9294.jpeg
    2.4 MB · Views: 6
  • IMG_9296.jpeg
    IMG_9296.jpeg
    1.9 MB · Views: 6
  • IMG_9292.jpeg
    IMG_9292.jpeg
    1.2 MB · Views: 6
Well this is an interesting development. Ants pollinated my Leonotis nepetifolia, so perhaps they will also pollinate my salvia?

Someone sent me this guide—seems like hummingbirds pollinate both. The world is full of mystery.
 

Attachments

Last edited:
Back
Top Bottom