extraction

Hi all, I have recently performed my first harmalas extraction by following this tek and, unfortunately, I ended up with rather low yields, so I'd like to understand how I can do better next time. In short, I used 100 g of Syrian rue and I got only 500 mg yield out of it, which is 0.5%. I was...

Hi all, I'm looking for a path to extract freebase DMT without naphtha and I wanted to sense-check my thinking. Why do I want freebase and why do I not want to use naphtha? Naphtha is somewhat dangerous to handle and it is difficult to find clean naphtha in some parts of the world. As for...

Hello, this is my first post I have, chaliponga, chapiponga, Jumera purple , Yopo seeds, MHRB, as well as banisterious capi. I recently tried using chaliponga and chapiponga, via smoking. but didn't feel any effects. I don't own any lab equipment, but do have calcium hydroxide and a dehydrator...

Hey all, I'm new to this scene and I recently ran a few naphtha-based extractions and created a vape pen out of it, but finding the right naphtha is very difficult where I am, so I'm looking to pivot to a D-limonene approach, such as Q21Q21 tek. I'm not sure if the resulting jimjam product is...

SWIM is new to extracting DMT. he tried Lasyman tek once, and now I try Acid to base. he did the defatting with Naphta during the acid phase. added Naphta to the soup, nothing happened. He couldn't see any fat transfer into the Naphta, He decided to bring it to double boil, and check it...

Hey everyone, I've been following this forum for several years now, mostly quiet, reading and learning from discussions here. I've always been fascinated by DMT, the hyperspace, entities etc. I was always hesitant because of the legal consequences but fuck them. The hyperspace needs to be...

Greetings, this is my first post, and I hope it will be followed by many more. I'm looking for advice, and I hope that you may be able to help. Mostly finding the right solvent, but I have a few other questions. I'm planning to use the tek from this video (I'm not sure if this tek has a...

I did look at the posts around the topic here and still not sure where things land. Heptane seems like the better mechanism for pulling and purity and is just higher cost. If cost was no issue than what if any is the advantage to Naptha (VM&P of course.)

Hello everyone, finally got to doing the HIELO Tek properly. Anyways everything went relatively well. Aside from a bit more EA absorbing into the material than expected. The thing is, no water layer is forming after fridge rest. Should I just continue or maybe use the freezer or another way of...

Hello Everyone! I have somewhat successfully pulled DMT from 50g Mimosa Hostilis bark although with a few issues that I'm not 100 percent sure on the cause. My way of wording can be a bit confusing so I will try my best to make it easier to understand my process. Here is a run down on the...

So my friend is having an issue. She's currently boiling up some mimosa, (from what I've been told from a seasoned extractor) I can't remember the name of the exact tek she used but it's the long one where ya boil a pot for 2 hours then strain it off and so on. So, I was always under the...

We often have members new to extraction that come looking to learn the basic principles behind the process, and It's always a challenge for me to dig up these excellent threads when I need them. So I'm compiling them here for easy access. DMT Extraction Overview Basic Chemistry EXTRACTION...

After I remove from pressure cooker and add naptha then extract. Do I add the tea back into the stained bark for another round in the pressure cooker? Or do I just extract from same tea 3x n throw bark away?

I'm looking at extracting MHRB and I'm leaning towards Lazyman's Tek because it doesn't use a ton of water and I could feasibly do 200g in one batch, but it involves evaporating the Naphtha and I don't want a bunch of gross solvent vapor in my house. I was also looking at Noman's Tek and like it...

Good morning everybody. It's been about a decade since i last posted here. Im experienced with the extraction of DMT using Q21's tek, and some experience with other extraction methods for DXM and LSA. Circumstances have led me to wish to pursue the extraction of Ibogaine. I have conducted a...

Used a STB tek on 100g of MHRB 750ml of distilled water 100g of sodium hydroxide (I know it’s a lot I didn’t have ph strips so I overused to make sure I met ph requirements) 150ml of Vm&p Naphtha (clean evap test) Just harvested from my Pyrex of the first pull on my first attempt at doing this...

Hey all ! 28 yo around Seattle. have recently dove into all sorts of Psychedelics and absolutely love the exploration and benefits. One I have not tried or gotten ahold of is DMT. I am eager to explore and looking for some simple ways of “kitchen” extraction to make this journey possible...

Hey everyone, I recently started extracting harmalas and after going through the most common teks, a few questions came up regarding their differences and overall efficiency. 1. Repeating Manskes: is it necessary to freebase and re-acidify in between? I understand this step is supposed to...

Hi, I am joining this website to help me search for a treatment for my depression. I believe this is an innate illness for me since it started in early adolescence and keeps coming back. I've seen countless psychiatrists and psychotherapists. I was given more antidepressant pills than I can...

I was wondering if the bark that I have is any good . It looks like a lot of outter bark. So I’m just wondering if the inner bark is attached to the outter. Idk how deep you have to go to get the valuable bark.

I live in turkey and can't acces to regular stuff but I found someone selling heavy industrial grade naphtha is this too much for extraction guys?

Ive been doing some research on dmt and decided to conduct an extraction. Im curious whether it matters to grind the root bark or get it as powder?

Need a Lil advice! I have tried both AB and STB method. Quite a success at first but now i can not for the life of me figure out why my dmt tastes so terrible and vapory. Both methods are definately producing nice white crystals. Its the taste that just burns like fire. I know about washing it...

Hello, I'm new here. I live in South-Eastern Europe, somewhere in the Pannonian Basin. I was interested in finding out if there's a list of plants that grow in Europe and specifically in Hungary, Romania, Serbia and Croatia that are safe to use for extraction and that contain DMT at all. I've...

Hi everyone! I Apologize if my english not good enough, It is my second languages. I am about to try pharmahuasca for the first time, but there’s an issue. It is hard and way too expensive to get harmala/rue in country where I live. I heard that nicotiana rustica (mapacho) content of MAOI is...

1. Starting with 1000 Hawaiian Baby Woodrose seeds frozen 24 hours and ground to a fine powder with a mortar and pestle, deposit your powder into a jar and cover with petroleum ether, allow to sit 24 hours, filter, cover with fresh petroleum ether and allow to sit 24 more hours, filter, allow...

I used the Cybs Salt method with MHRB and followed the measurements correctly as they are there, I just used Zippo lighter fluid instead of naphtha, I used vinegar, salt and hot baths. After removing it from the condenser, it gave me a low amount, not to mention no crystals. I tried it once more...

Hi all! finally gathered all my supplies and felt confident enough in all of my obsessive research from the last 2 weeks to attempt my first extraction. I'm pretty ecstatic w/ the result so far and figured i'd share. i had thought i'd settled on my tek 2-3 times before finally deciding to go...

Hey everyone! After a 10 year hiatus and not being able to reactivate my login from the old forums, I've finally got around to re-registering after months of lurking. Here's my "failed" attempts at Q21Q12's tek and Cyb's Hybrid Salt Tek. Feeling a little disheartened and wonder if anyone can...

So SWIM is considering doing another extraction soon and the current place he lives doesn't have good ventilation. Was wondering if anyone has had luck with a HEPA grade air purifier for getting rid of naphtha/solvent fumes or any easy setups that you know of. If anyone has any experience with...

SWIM has been reading many different teks, and working hard to learn about the chemicals he could potentially use, and already seems to have a mescaline extraction well figured out, heavily based off of the KASH's A/B mescaline extraction tek. He has learned a lot about it the past few days, and...

Hello, I'm new here. Just wanted to get some thoughts on an old mix I have. I'm not sure exactly how long it's been under my sink forgotten, years for sure. Back then had some mhrb bark lye mixture and realized I had very little naptha. So I decided to pour the soup into the naprha can and...

QUESTION: Why so reddish/brown? Is it good for consumption? Would you re-crystalize it? how? I tried my usual extraction path, cyb´s A/B max ion tek. Mimosa hostilis rootbark and Heptane as solvent But this time, I tried filtering the MHRB material with a cheese cloth (actually and old...

Hello. I’m new to DMT. I have searched for the TEKs and because of the geographical issues I only have access to specific materials to extract DMT. Which are; 1- Hexane 2- Naoh (Sodium Hydroxide) 3- MHRB <MOD EDIT - No Sourcing Talk!> I’ve never done extraction before and I’m afraid I could...

Hello every space traveler out there. I have a question. So, I already added Naptha to the Soup and did all required steps like heating the soup in a warm bath with the Naptha mixed with the lye and mimosa powder. Here's the thing ; The Naptha that I see is around 20 ML and I added 80 ML of...

Hi Using lazyman's/nomans teks since around 2010, I now tried with 100% xylene for the first time. Evap test completely clean, but it takes a long time to evaporate. I started with 50g powdered (very, very finely powdered!) MHRB, 75g NaOH, 0,5l water and used 20 to 30ml room temperature...

I have some basified mimosa soup left over from a STB extraction I finished about 4 months ago. I’ve been sitting on the left over soup, as I intend to pull from it using toluene to extract some jungle spice. How long can I let the bark soup sit and still safely pull from it? Is there any time...

Hello everyone, I would like to extract DMT from Mimosa Hostilis and am not satisfied with my first attempt. The end product is more of a powder than crystals and the effect is also somewhat disappointing. My throat hurts a lot after smoking and I have no auditory hallucinations and just few...

I just did my first DMT extraction and I'm now trying to get the residual Naptha to evaporate from the crystal left in my Pyrex dish. It seems a little oily and I'm wondering if there are any tips or tricks to getting it to evaporate. I've dumped the bulk of the naotha back into my plant matter...

Someone suggested that basifying a crude xylene extraction with Ca(OH)2 and drying it would allow one to extract the DMT freebase from the slurry, leaving behind the Ca(OH)2 and calcium acetate (having used acetic acid for the aquesous phase) as they are not soluble in ethanol. Now, what's...

On thttps://wiki.dmt-nexus.me/Psychedelic_Compounds_Chemical_and_Physical_Properties#DMT_N-Oxide "...Soluble in water..." without further info is stated. If someone had obtained a "full spectrum" extraction with xylene containing DMT and its N-oxide, could plain distillied water be used for...

I have found two threads on this matter already, though the links provided were dead. As far as content go, they simply mention that one needs a P3 mask, which is a mask that has the highest safety rating. As such, a P3 mask can be many different things. Although a mask with a P3 rating does...